Fingerprint lock daily maintenance tips to share

When the smart lock is so hot, I believe that many people have already started to use smart locks, and there are many kinds of smart locks. They are: fingerprint lock, swipe lock, password lock, face recognition lock and so on. The different smart lock right maintenance skills, the following for everyone to share under the fingerprint lock daily maintenance skills!

1. When fingerprints are collected, the finger strength should be moderate. Do not apply your “Strong Finger” when it is impossible to collect. At this point it may be that your fingerprints are too dry, try a few breaths on your fingers, and make your fingers moist. (I heard that you can also touch the forehead. There can be magical "magic" there.)

2. Fingerprint acquisition window Because of the long time of use, there will be dirt on the surface, which may affect normal use. Wipe with a soft cloth at this time.

3. The fingerprint lock panel must not be in contact with corrosive substances. Otherwise, the surface coating will be damaged. Then your fingerprint lock can be “broken”.

4. Is it convenient to hang an object on the handle? However, it is too casual. Because the handle is a key part of opening and closing the door lock, its flexibility will directly affect the use of the fingerprint lock. (Don’t think it's okay to hang it up once and for all, bear children but imitate it.)

5. LCD screen, do not exert pressure and tap.

6. Do not bump or knock the shell with hard objects to prevent damage to the surface coating or indirectly affect the internal electronic part of the fingerprint lock. (Well, on this point, you should take care of the bear children.)

7. Do not use alcohol, gasoline, thinner, or other flammable substances to clean or maintain this lock.

8. There is a fingerprint lock on the slide cover, please do not pull the slide cover outwards, use moderate force when pushing open and close, and use the slide cover correctly.

9. Waterproof protection. Fingerprint locks are electronic products. Although our fingerprint locks are protected against water, please avoid touching water or other liquids or immersing them in water or other liquids. If the shell comes in contact with liquid or salt spray, wipe it dry with a soft, absorbent cloth.

10. Please use high-quality 5 # alkaline batteries. Once you find that the battery is low, please replace the battery in time. When replacing the battery, it is recommended to replace the four batteries at the same time, and you can also avoid the trouble of using an external battery to unlock the battery. If you go out for a long time and remember to replace the new battery to prevent damage to the battery, the battery fluid corrodes the internal circuit!

11. Fingerprint lock If you use more than one year, please open the battery cover to check the battery, to prevent the battery from electrocuting fingerprint lock circuit board (especially when the rainy season, humid air will have any hidden dangers to any household electrical appliances, please timely Check maintenance, use your home appliance correctly, and find that there is oxidation in the battery. Please replace the battery with good quality!

12. Fingerprint lock with spare key, remember to place the key outside the home in the car or office so that it is urgently needed.

13. When entering a fingerprint, it is recommended that you write down the code so that you do not remember to remember the code when you need to delete a fingerprint, and you do not need to clear the fingerprint lock.

14. The most basic way to open a smart lock is to open the door by fingerprint and open the password. Although most people will choose the most convenient fingerprint opening, it is recommended to set several sets of passwords at the same time so as to prevent the password from being opened when the fingerprint is broken. In case of guest visit or emergency, you can tell the password to open the door and delete the password afterwards.

15. Do not disassemble and disassemble. Fingerprint locks basically have built-in sophisticated electronic components. Non-professionals may damage internal components or cause other serious consequences when disassembled. If you suspect there is a problem with the fingerprint lock, it is best to consult a professional or contact the seller directly for repair.

WIFI Smart Lock (http://zns.znjj.tv)-Professional smart lock agent joining website, providing the industry's most comprehensive intelligent fingerprint password lock joining agent, smart lock product library, smart door lock price, smart lock brand , smart lock manufacturers Daquan information, welcome to browse online consulting.