Home>Bearing knowledge>Sleeve method of INA bearing

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

INA bearing smooth method

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Five smooth methods for INA bearings:
1. Manual smoothing When it is found that the smooth oil of the INA bearing is lacking; when using the oiler to supply oil; this is the most primitive method. It is difficult to insist on the oil quantity; the risk of forgetting to refuel due to negligence is large; For light load, low speed or intermittent motion. It is best to install dust cover or ball valve on the oil hole; use felt, cotton, wool and other filter equipment.
2, the oil pad smooth using the capillary effect of the oil pad; the smooth oil in the oil pool is applied to the outer diameter of the shaft diameter. This method can make the conflict appearance often adhere to clean; but the dust will also block the capillary hole to form a lack of oil supply. The oil supply is generally 1/20 as long as the oil is smooth.
3, smooth oil ring can only be used for the smooth method of the horizontal axis. The smooth oil of the oil pool is brought to the bearing by the ring hanging on the shaft and rotatable. It is suitable for medium and high speed INA bearings with shaft diameter greater than 50mm. The oil ring is the best seamless; when the bearing width to diameter ratio is less than 2; only one oil ring can be used; otherwise, two oil rings are needed.
4, the splash bearing relies on the slap of the rotating part of the fuel tank and splashes the smooth oil supply INA bearing; suitable for higher speed bearings.
5, smooth oil bath immersed part of the bearing into the smooth oil smooth method. This method is often used for vertical shaft thrust bearings; not suitable for radial INA bearings of the horizontal shaft.

---

Recommend to friends comments close window

Bearing related knowledge

The preparation of the rolling bearing convention view begins to calculate the equivalent load of the bearing. The maintenance of the centrifugal compressor thrust bearing The characteristics and layout characteristics of the Shandong Xinyou seven-type bearing The meaning of the suffix of skf paired single row angular touch ball bearing

This article links to http://
Please indicate the bearing network http://

Previous:Ball mill bearing sliding tumbling energy saving and high efficiency Next: Identify whether SKF bearings can be reused

INCOLOY®

The registered trademark name, Incoloy, is applied as the prefix name to several highly corrosion resistant high temperature strength metal alloys produced by Special Metals Corporation. These Incoloy alloys or superalloys are nickel-based alloys that exhibit traits that include good corrosion resistance in aqueous environments, excellent strength and oxidation resistance in high-temperature settings, good creep-rupture strength, and ease of fabrication.

Alloys of identical chemical and mechanical properties are available from other manufacturers and offer excellent alternatives to the various Incoloy brand alloys.

The corrosion-resistant superalloys are widely used in extreme environments where tremendous heat and corrosion resistance is paramount to the integrity of the end product. Chemical and petrochemical processing, power plants, and oil and gas industries widely use these superalloys.

Incoloy Availability

Yuhong Group supplies Incoloy 800, 800H/HT and 825 in the form of plate, sheet, strip, bar, wire, pipe, tubing, pipe fittings, and flanges.

What are the Characteristics of Incoloy ?

Good corrosion resistance in aqueous environments
Excellent strength resistance in high-temperature settings
Excellent oxidation and carburization resistance in high-temperature settings
Good creep-rupture strength
Ease of fabrication

In what Applications are Incoloy alloys used ?

Process piping, heat exchangers, carburizing equipment, heating-element sheathing, nuclear steam-generator tubing
Chemical and petrochemical processing, power plants, industrial furnaces, heat-treating equipment
Pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, pickling equipment

Superalloys, also known as high performance alloys, have become the steel of choice for corrosion resistance and versatility.

*Incoloy® is a registered trademark of Special Metals Corporation group of Companies.

Incoloy Pipe

Incoloy Pipe,Incoloy 825 Pipe,Incoloy 625 Pipe

YUHONG GROUP CO.,LIMITED , https://www.jessro-pipefittings.com