1. Cabinet Introduction
The cabinets on the market today are dazzling, with different styles from colors to styles. In addition to the appearance of the purchase, the selection of quality is also critical. To buy a fine workmanship, good quality cabinets need to pay attention to the following points:
First look at the edge: Large manufacturers use modern machinery and equipment, using high temperature and high pressure edge, after the edge of the appearance of clean and firm appearance, to avoid long-term use of water vapor damage to the cabinet, can make the cabinet more durable, and the small workshop will be sealed It looks rough.
Second, look at hardware accessories: suitable for the corner cabinet to place the rotating disk, push-pull storage racks and other hardware accessories can make the cabinet in an orderly manner, and a good cabinet can hardware accessories and cabinets, cabinet doors The perfect combination, opening and closing in use, no noise, can withstand tens of thousands of switches without deformation damage.
The third look at the water stop design: The table top has a special water stop design, so that the water on the countertop does not easily fall onto the cabinet. It is also a guarantee that the cabinet can be used for a long time.
Fourth, the environmental protection of materials: It is mainly reflected in the adhesives used for the plates, countertops and edge seals. All these materials must meet environmental requirements. Among them, the board needs to use man-made boards with formaldehyde emission standards, and the fireproof board and artificial stone are the better choices for the countertops.
The fifth look at the service: not only includes the pre-sale measurement design, sales carefully installed, including after-sales service. Such as the establishment of user files, timely return visits, problems and timely solutions.
2. Detailed description
2.1. Edge sealing
The edge banding is the most basic accessory in the cabinet. There are two roles of edge banding. The first is the edge banding to prevent moisture intrusion. The second is to effectively eliminate trace formaldehyde emissions from the board. Third, reinforce the sheet. Different cabinet brands will use edge banding. There are various ways of edge banding. There are PVC edge banding, metal banding, etc. However, the process used for edge banding is very different, for example, some small ones. Some brands that do not have strength often use some low-cost edge-sealing equipment for edge-sealing. They use hot melt glue with high formaldehyde content for edge-sealing. After such edge-sealing comes out, the first does not restrict the release of formaldehyde, but because the glue The high formaldehyde content increases the amount of formaldehyde released. Second, the use of simple equipment and even manual edge sealing, the effect of the edge is not beautiful, but also after a period of use, the edge banding will be arched, will drag the plate deformation, because of the deformation of the cabinet door.
2.2. Hardware
The quality of a set of cabinets, in addition to the quality of the door to see it, the advantages and disadvantages of hardware can not be ignored. Cabinet hardware plays an important role as connecting parts of the whole cabinet. Therefore, special attention must be paid when purchasing.
2.2.1. Thickness of hinges
The types of hinges can be roughly divided into three types: full cover, half cover, and inner side. The type of hinge is mainly selected according to the different installation methods.
From the appearance point of view, high-quality hinges and poor-quality hinges are not much different. The only difference is observation of their thickness. A good hinge is formed by stamping the alloy once. It has a thick feel and a smooth surface. Due to the thick coating on the surface, it is not easy to rust, is solid and strong, and has a strong bearing capacity, so that the door of the cabinet can be stretched freely and the door cannot be closed tightly.
2.2.2. Pulling hands carefully
At present, there are four types of handles on the market: plastic handles using transfer technology, zinc alloy handles, aluminum alloy handles, and stainless steel handles. The most widely used on the market today is the zinc alloy handle. The surface plating technology is particularly critical. If the surface of the metal plating is not properly handled, it can easily fall off. The soy sauce, salt, etc. in the kitchen have certain corrosive seasonings, and even the salty sweat in the hands can make the zinc alloy handles become dull.
Plastic handles have a non-corrosive, non-fading property and are the most suitable handles for use in the kitchen. The coating on the surface of the plastic handle can be shaped arbitrarily, with strong lines and beautiful appearance, and it is becoming the new darling on the handle market.
2.2.3. The best three-in-one connector
A single cabinet generally uses 12 connectors. The connector is usually divided into two types, one is a three-in-one connector; the other is a two-in-one connector. The three-in-one connectors, also known as invisible connectors, are more commonly used today.
The three-in-one connector is composed of a plastic head, a connecting rod, and a connecting cap. The quality of the three-in-one connector depends on the accuracy of the connecting rod. The micro-connected rod ensures the accurate splicing of the cabinet. The two-in-one connector is exposed on the outside of the cabinet, which is unsightly and generally not used.
2.2.4. Slide sorting type to see price
The slide rails are divided into three sections of slide rails, pump rails, and roller rails according to the design method. The three-section slide is made of wood as a baffle on both sides of the drawer, which is basically the standard configuration of all the cabinets. The roller track slides between the steel chutes using nylon or plastic rollers and pulls out the drawers. The pumping rail is referred to as horse riding pumping. It includes a metal baffle and has a rebound function.
The load-bearing capacity of the three-section slide rail is generally about 20 kg, and the load-bearing capacity of the pull-up rail is about 40 kg, and the simple rebound drawer also has about 40 kg load-bearing capacity. The length of the slide rail is the main factor affecting the price. Generally, the price of the pump rail is high, and the non-damped price is also more than 200 yuan per pair.
2.3. Environmental protection materials
2.3.1. Solid Wood | Decoration Reviews
The use of solid wood cabinet doors, style is more classical, usually higher prices. Its door frame is solid wood, mainly cherry, walnut and oak. The core of the door is a medium-density board with solid wood. In the production, concave and convex shapes are generally made on the surface of the solid wood, and paint is applied outside, so that the original wood color is maintained and the sculpt is beautiful. This can guarantee the special visual effect of solid wood, and the combination of the frame and the core board can ensure the strength of the door panel.
2.3.2. Blister type
The blister board substrate is a density board, the surface is vacuum-plasticized or a seamless PVC film pressure molding process is adopted. Blister-type door panel is rich in color, vivid wood grain, pure color, pure color, no cracking and deformation, resistance to scratch, heat, stain resistance, fade resistance, is the most mature cabinet material, and daily maintenance is simple. Blister door panels are a very mature and very popular type of cabinet material in Europe, but the quality of many PVC blister door panels made in China is not excessive.
2.3.3. Melamine Panel Type
The melamine board full name is a melamine impregnated film coated wood-based panel, which is a paper with different colors or textures soaked in melamine resin adhesive, and then dried to a certain degree of curing, it is paved on particleboard, MDF or The surface of hard fiberboard is hot pressed. The melamine veneer door is represented by the German love family board, which has the advantages of smooth surface, no deformation, bright color, wear resistance and corrosion resistance, and the price is moderate. Coupled with the original seal notes, giving a visual effect as a whole. The domestic production of melamine veneer door panel is represented by Lushuihe plate, and all the indicators have also reached international standards.
2.3.4. Molded Type
It uses a density board as a base material and a face mold PVC as a veneer to be molded at a high temperature and heat pressure. It is divided into two categories: matte molded plate and high-gloss molded plate, and can be processed into various shapes. There are domestic imports of facial masks, imports generally come from Korea, Japan, Germany. The difference between imported and domestic products lies in the thickness and thinness of the face mold and wear resistance.
2.3.5. Metallic type
The structure is a metal plate or imitation metal plate that is attached to a medium-density board and subjected to special oxidation treatment, fine wire drawing and polishing, and the surface forms a dense protective layer. This material has excellent wear resistance, high temperature resistance, corrosion resistance, and daily maintenance is simple, delicate texture, easy to clean, long life.
With the prevalence of metal pop, this high-grade metal door panel has become a new favorite, including aluminum finish convex panel, is the most high-end kind of door. But its price is high and it is suitable for pursuing ultra-high-end decoration that is in sync with the world's fashion.
2.3.6. Paint type
The substrate of the paint board is a density board, and the surface is baked at a high temperature after six times of baking and baking the paint (three bottoms, two sides, one light). The "baking paint" currently used for cabinets only illustrates one kind of process, that is, after the paint is sprayed into the drying room, it is heated and dried to treat the substrate door.
The paint plate is characterized by its bright color and easy shape, strong visual impact, very beautiful and fashionable, excellent waterproof performance, strong anti-pollution ability, and easy cleaning.
Disadvantages are high level of technology, high scrap rate, so the price is high; use care must also be carefully guarded against fear of bumps and scratches, if it is damaged, it is difficult to repair, to replace the whole; smoke more likely to appear in the kitchen Chromatic aberration.
2.3.7. Fire Board Type
Fire board type door panel is currently the most used door panel material, its color is more vivid, the various forms of edge sealing, with wear resistance, high temperature resistance, resistance to moisture, resistance to penetration, easy to clean, moisture, no fading, delicate touch, affordable Etc. The fire board door base material is particle board, moisture proof board or density board, and the surface is decorated with fireproof board veneer. The price of domestic fire door panels is relatively low, and the cost of Korean plate and German board will increase by about 25% and 50%.
The fire board is in line with the development trend of the combination of “beautiful and practical†cabinets, so it is prosperous in the market. The disadvantage is that the door panel is a flat panel and cannot create three-dimensional effects such as bumps and metal, and the fashion sense is somewhat poor. Fire board is made of silicon or calcium material as the main raw material, and a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives mixed by autoclave technology made of decorative plates.
2.3.8. Package type
The cover frame type door panel door frame base material is medium density board, outsourcing PVC, the door core board is double love decoration board or fire board and so on. It is spliced ​​by the cabinet company itself; it has the advantages of rich colors, borders and The double trims are randomly matched to fully reflect the individual fashion, and the routine maintenance and cleaning are convenient and concise. Moreover, the frame plus core board structure is stable, does not deform and does not require edge sealing. This door is ideal for modern people.
2.3.9. Crystal type
The crystal plate is made of a base material plus white fireproof board plus acrylic. Small workshop manufacturers use organic glass; standard manufacturers use acrylic, environmental protection and modeling three-dimensional. This material enriches the design of the cabinet and has played a positive role, and is deeply loved by some people.
2.3.10. Mirror resin board
The mirror resin board is still used in the cabinet market. Its properties are similar to that of the paint door, which is fashionable, colorful, and waterproof. However, it is not wear-resistant, easy to decorate, and its high temperature resistance is not very good. Therefore, consumers who have high color requirements and are eager to pursue fashion can choose cabinets with mirrored resin plates, but because they are easy to decorate, care should be taken when using them.
The identification of cabinets is designed in every aspect, and it is difficult for the average consumer to go into detail and understand the details. In general, choosing a well-known brand will be more secure, and it will save a lot of bothersome things before and after purchase.
Cabinets Doors prices Paints Formaldehyde Decoration Designs Decorators Style Drawers Cabinets Doors Craft Glass Stainless Steel Cabinets Stainless Steel Kitchen Cabinets Glass Cabinets Doors Cabinets Doors Kitchen Doors Glass Doors Doors Kitchen Glass Sliding Doors
Emergency Light ,Emergency Lamp,Rechargeable Emergency Light,Led Emergency Light
NINGBO JIMING ELECTRIC APPLIANCE CO., LTD. , https://www.jimingemergencylight.com