1, the flat gate valve seat seal structure should be bomb
The pre-tightening force has the structure that the upper and lower sealing seats are sealed at the same time. The valve seat and the seal are always face-to-face sealed.
2. The valve seat has a self-cleaning function and is not directly eroded by the air flow during valve opening or closing. The seat should be made of lubricated, non-abrasive material.
3. Failure of the valve actuator will not affect other parts of the valve. Maintenance and replacement can be performed without removing the valve.
(1) Flat gate valve yoke bushings - Aluminum bronze yoke bushings are equipped with needle thrust bearings to minimize operating torque.
(2) Stem - thread length up to the bracket; pin and spot weld; stability.
(3) Pressure seals - Simple in construction, configuration of segmented retaining rings and silver-plated mild steel gaskets facilitate disassembly and best bonnet sealing.
(4) Flat Gate Valve Seat Ring – The welded seat ring is perpendicular to the flow passage for easy maintenance.
(5) Actuators - These valves can be equipped with electric, hydraulic or pneumatic actuators. Standard manual handwheels for DN300 and below, and helical gear operators for DN350 and above.
(6) Yoke - Fully assembled yoke through seismic test, easy to maintain and install the actuator.
(7) Gland - Two-piece, self-adjusting gland to avoid being ejected.
(8) Integral rear seat - Hard face, longest service life.
(9) Disc - The spring-loaded clapper adjusts itself to reduce the torque demand of the actuator.
(10) Slab gate valve as a whole stop - integral casting bracket stop device, positioning the assembled bracket valve, making the valve seat more stable and reliable.
Expanded Metal Mesh
Expanded metal is sometimes considered an alternative to sheet metal or wire mesh. It combines some of the best features of both-providing a material that is stronger than thin wire mesh and has better air flow and drainage than sheet metal.
Expanded Metal Mesh,Element Expanded Metal Mesh,Aluminum Expanded Metal Mesh,Ss Standard Expanded Metal Mesh
HEBEI KAYI BUILDING MATERIAL TECHNOLOGY CO.,LTD , https://www.kayimesh.com