1, the daily cleaning of tiles can be washed with detergent, soap and so on.
2, add a little ammonia and turpentine mixture with soap, clean the tiles to make the tiles more shiny.
3, polished tiles should be waxed regularly, the time interval is 2-3 months is appropriate.
4. If there is scratch on the brick surface, apply toothpaste on the scratched surface and wipe it with a dry cloth to repair it.
5, bricks and bricks can be used occasionally with decontamination paste to remove dirt, and then a layer of waterproofing agent in the gap, can prevent mold growth.
6, tea, coffee, beer, ice cream, oil and other pollutants using sodium hydroxide or potassium bicarbonate solution.
7. Contaminants such as hydrochloric acid and nitric acid are used as pollutants in ink and cement.
8. Use special cleaning agents for paints, paints and other pollutants.
9. Rust can be washed with 2% oxalic acid solution and then wiped with water. After pulverizing with 3-4 vitamin C tablets, sprinkle it on the surface of the floor tile and then wash it with water several times to remove rust stains. If it is rust stain, use 10% oxalic acid, citric acid and water mixture to soak the rust, then wipe it again with concentrated brine. If you have fresh lemon, you can squeeze out the juice and rub it on the rust stains, and repeat it several times until the rust stains are removed, then wash it with soapy water.
10, all kinds of glue can be removed with banana water, pure banana water is colorless, transparent and volatile liquid, has a strong banana smell, slightly soluble in water, soluble in various organic solvents, flammable, mainly used as spray paint Solvent and thinner.
Note: High quality tiles can be cleaned with cloth and water. Use as little or no other chemicals as possible.
Superabrasives come in the form of grinding wheels and are used when the material being processed is either too hard or too delicate for regular abrasives.
Industrial diamonds are one of the most common materials used to create the grinding material. Contrary to popular belief, diamonds are not as rare as marketing campaigns will tell you.
After diamonds,cubic boron nitride is the second more durable material for cutting. This is followed by polycrystalline.
The most obvious advantage is that these Grinding Wheels are extremely hard and durable. This allows them to give better performance and greater longevity over regular abrasives.
When your wheel lasts longer you will see reduced costs for fixtures and tooling. This opens up your budget up to investing in more machines.
You will notice that the wear and cuts on your materials will be even. Because the abrasiveness of the wheel is so strong, it doesn`t develop uneven worn away spots as quickly as regular abrasive wheels.
So the output from your production will be consistent. So your manufacturing efforts will produce reliable and consistent results.
It can be tough to justify the upfront increased costs of superabrasive wheels. But the durability and quality of their production output make them well worth it.
But you`ll quickly realize that your productivity has increased by using superabrasives. You will have more parts processed per wheel and fewer wheel changes.
Kemei produces both conventional grinding wheel and super abrasive grinding wheels, such as white aluminum grinding wheel, pink wheel ,green silicon wheel, diamond grinding wheel and CBN grinding wheels.
If you need any type of grinding wheel and any suggestion on grinding wheels, just contact us.
Super Abrasives,Grinding Wheel Stone,Grinding Wheel For Bench Grinder,Electroplated Cbn Cut Off Wheel
Henan Jinlun Superhard Material Co., Ltd , https://www.jinlunsuperhard.com