In the era of pursuing individuality, people are getting tired of the "one thousand cabinet side", and they all hope to create the wardrobe they really want according to their own ideas, in order to show their unique personality. Although custom wardrobes can meet the different needs of different consumers, consumers should be careful when choosing a custom wardrobe, not to be blinded by the gorgeous appearance of the wardrobe. The hardware accessories determine the service life of the wardrobe to a large extent. Here, Xiaobian reminds everyone: Be careful, "Golden jade is out of it."
Individual bad wardrobe manufacturers have seen a lot of consumer custom wardrobes only look stylish and beautiful, as far as "inner" care is not much, just drill this loophole. An industry insider pointed out that in order to reduce costs, the plates used by some manufacturers are uniform, either using particleboard all or medium density fiberboard. In fact, these two kinds of plates have advantages and disadvantages, and will be magnified once they are used. If the MDF is not easily deformed, it is suitable for the door panel of the wardrobe, but it is not suitable for the connection of the three-piece, and it is not suitable for the cabinet.
The particle board is a loose structure in the middle of the two sides. It has a grip on the connection of the three-piece sleeve and is suitable for the cabinet body. However, due to the looseness in the middle, the deformation is not suitable for the door panel. There are also some custom-made wardrobes that never care about the "behind-the-scenes work" hardware. In fact, whether a wardrobe is durable is determined by a myriad of small hardware connectors. The quality of small connectors is several times or even ten times different. With good hardware, the cost of the wardrobe is higher, but the life is longer.
Tuen Mun 1: Check if the accessories are installed properly.
For example, check that the door lock switch is not working; the big cabinet should be equipped with three dark hinges, and some can only be installed with two; the upper three screws, some cut corners, only one screw, will be used.
Tuen Mun 2: Mirror wardrobe to check the back
If you choose a wardrobe with mirrors, you should take a photo and see if the mirror is deformed or not. Check if there is a liner and a backing plate at the mercury in the back of the mirror. No backboard is unqualified. No paper will work. Otherwise, Grind the mercury off.
Tuen Mun 3: Check the veneer wardrobe is not strict
Whether it is veneer veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is drum, foaming or not. Look at the light when you check it, and don't see it when you don't. The ash veneer veneer veneer is relatively easy to damage and can only be used for two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. The way to identify the two is to look at the pattern of the wood. The wood texture of the cut veneer is straight and dense, and the veneered veneer pattern is curved and sparse. The particleboard veneer closet must be sealed on the ground, and the edgeless plate will absorb moisture, rise and damage. Generally, the corners of the veneer close to the corners are easy to tilt up. When picking, you can use your hand to rub the corners. If you get up, it will be a problem with the glue.
GUOLONG PRECISION VALVE CO.,LTD , https://www.glstovevalve.com