The main reason for the noise of the heat-conducting oil pump is that the bearing is damaged or the heat-conducting oil pump causes cavitation in the circulation due to high temperature and the vibration caused by the unstable supporting of the heat-conducting oil pump. Due to long-term contact with the heat transfer oil pump, the user does not often replace the oil in the bearing chamber during use, resulting in long-term high-speed bearing damage to the heat-conducting oil pump bearing caused by the long-term bearing failure under long-term lubrication conditions, thereby generating noise in the heat transfer oil pump. Conductors should be regularly maintained in the daily production of thermal pumps, cleaning, timely replacement of the bearing chamber to the bearing lubrication of oil. Once the bearing damage should be promptly replaced bearings, in order to avoid damage to other parts of the pump. In addition, the newly installed customers often use the oil pump for the first time when the oil temperature rise too fast or the oil temperature rise too high, which will result in the heat generated in the pipeline oil, these gases in the heat transfer pump during the delivery cycle Through the heat transfer oil pump will instantly explode, so when the heat transfer oil pump noise. When the first use of heat-conducting oil pump, the oil temperature should be slowly raised at the same time start the heat-conducting oil pump, one after another to open the pipeline exhaust valve to clean the gas line after the official use of heat-conducting oil pump. Another is the thermal oil pump inlet and outlet pipe is not installed in the installation of the support point or the support point is not stable resulting in the use of heat transfer oil pump has a huge pipeline resonance, it will produce noise. Should promptly stabilize the pipeline support.
INDOOR LIGHTING
Indoor Lighting,Home Ceiling Lighting,Led Flat Tube Batten Light,Indoor Led Linear Light
JIANGMEN MICHEN LIGHTING CO.,LTD , https://www.jmledbulb.com