Bright Constantan (CuNi44Mn) Copper Nickel Electric Resistance Heating Wire
onstantan As a big manufacturer and exporter in China on the line of electric resistance alloy,
we can supply all kinds of electric resistance alloy wire and strips (resistance steel wire and
strips),
Material: CuNi1, CuNi2, CuNi6, CuNi8, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi44.
1. CuNi44, also called Constantan, has a very low temperature coefficient, high electrical
resistance, high ductility and non-corroding properties. It is suitable for use at temperatures
up to 600° C (1110° F). As a very malleable, very ductile alloy, it has a very good resistance
to oxidation.
The alloy is non-magnetic. It is suitable for electrical resistors, potentiometers, heating wires,
heating cables and mats. Ribbons are used for heating of bimetals. Another field of
application is manufacturing of thermocouples because it develops a high electromotive
force (EMF) in association with others metals.
2. Chemical Composition
Alloy Ni% Mn% Fe% Cu%
CuNi44 43 Max 0.5 - Bal.
3. Products and services
1. Pass: ISO9001 certification;
2. Fine after-sale services;
3. Small order accepted;
4. Samples available;
Chemical Content, %
| Ni | Mn | Fe | Si | Cu | Other | ROHS Directive | |||
| Cd | Pb | Hg | Cr | ||||||
| 44 | 1% | 0.5 | - | Bal | - | ND | ND | ND | ND |
Mechanical Properties
| Max Continuous Service Temp | 400ºC |
| Resisivity at 20ºC | 0.49±5%ohm mm2/m |
| Density | 8.9 g/cm3 |
| Thermal Conductivity | -6(Max) |
| Melting Point | 1280ºC |
| Tensile Strength,N/mm2Â Â Annealed,Soft | 340~535 Mpa |
| Tensile Strength,N/mm3Â Â Cold Rolled | 680~1070 Mpa |
| Elongation(anneal) | 25%(Min) |
| Elongation(cold rolled) | ≥Min)2%(Min) |
| EMF vs Cu, μV/ºC (0~100ºC) | -43 |
| Micrographic Structure | austenite |
| Magnetic Property | Non |
Application of Constantan
Constantan is a copper-nickel alloy that contains specific minor amounts of additional
elements to achieve precise values for the temperature coefficient of resistivity. Careful
control of melting and conversion practices results in a very low level of pinholes at
ultra-thin thicknesses. The alloy is used extensively for foil resistors and strain gauges.
Bright Constantan (CuNi44Mn) Copper Nickel Electric Resistance Heating Wireonstantan As a big manufacturer and exporter in China on the line of electric resistance alloy,
we can supply all kinds of electric resistance alloy wire and strips (resistance steel wire and
strips),
Material: CuNi1, CuNi2, CuNi6, CuNi8, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi44.
1. CuNi44, also called Constantan, has a very low temperature coefficient, high electrical
resistance, high ductility and non-corroding properties. It is suitable for use at temperatures
up to 600° C (1110° F). As a very malleable, very ductile alloy, it has a very good resistance
to oxidation.
The alloy is non-magnetic. It is suitable for electrical resistors, potentiometers, heating wires,
heating cables and mats. Ribbons are used for heating of bimetals. Another field of
application is manufacturing of thermocouples because it develops a high electromotive
force (EMF) in association with others metals.
2. Chemical Composition
Alloy Ni% Mn% Fe% Cu%
CuNi44 43 Max 0.5 - Bal.
3. Products and services
1. Pass: ISO9001 certification;
2. Fine after-sale services;
3. Small order accepted;
4. Samples available;
Chemical Content, %
| Ni | Mn | Fe | Si | Cu | Other | ROHS Directive | |||
| Cd | Pb | Hg | Cr | ||||||
| 44 | 1% | 0.5 | - | Bal | - | ND | ND | ND | ND |
Mechanical Properties
| Max Continuous Service Temp | 400ºC |
| Resisivity at 20ºC | 0.49±5%ohm mm2/m |
| Density | 8.9 g/cm3 |
| Thermal Conductivity | -6(Max) |
| Melting Point | 1280ºC |
| Tensile Strength,N/mm2Â Â Annealed,Soft | 340~535 Mpa |
| Tensile Strength,N/mm3Â Â Cold Rolled | 680~1070 Mpa |
| Elongation(anneal) | 25%(Min) |
| Elongation(cold rolled) | ≥Min)2%(Min) |
| EMF vs Cu, μV/ºC (0~100ºC) | -43 |
| Micrographic Structure | austenite |
| Magnetic Property | Non |
Application of Constantan
Constantan is a copper-nickel alloy that contains specific minor amounts of additional
elements to achieve precise values for the temperature coefficient of resistivity. Careful
control of melting and conversion practices results in a very low level of pinholes at
ultra-thin thicknesses. The alloy is used extensively for foil resistors and strain gauges.
Geosynthetic Clay Liner is also named sodium bentonite composite waterproof pad. This is to make high swelling sodium bentonite filling into the inside between special composite geotextile and non-woven fabric. The bentonite impermeable cushion that made of acupuncture method can form a lot of small fiber spaces. This is to make the bentonite particles cannot flow in one direction. When encountering water, it can form uniformly high density colloidal waterproof layer in the pad, and effectively prevent water leakage. Geosynthetic clay liner is suitable for artificial lake water, landfill, underground garage, roof garden, pool, oil depot and chemicals yard.
| Projects/ Technical data | Specifications | ||
| GCL-NP | GCL-OF | GCL-AH | |
| Weight per unit area(g/m2) | ≥4000g/m2 | ||
| Bentonie swell index(ml/2g) | ≥24 | ≥24 | ≥24 |
| Ethylene blue absorption(g/100g) | ≥30 | ≥30 | ≥30 |
| Tensile strength (N/100mm) | ≥600 | ≥700 | ≥600 |
|
Racking strength(N/100mm)
(for nonwovwn and woven fabric)
|
≥40 | ≥40 | - |
|
Racking strength(N/100mm)
(for HDPE films and nonwoven fabric)
|
≥30 | - | |
| Permeability(m/s) | ≤5.0x110^(-11) | ≤5.0x110^(-11) | |
| Anti-static water pressure |
0.4Mpa,1h, not seepage |
0.6Mpa,1h,not seepage | |
| Filtration loss (ml) | ≤18 | ≤18 | ≤18 |
| Bentonite durability (ml/2g) | ≥20 | ≥20 | |
- Lightweight.
- Small volume.
- Excellent flexibility.
- Simple construction.
- Permanent waterproof.
- Good sealing performance.
- Green environmental protection.
Applications
Geosynthetic clay liner is a kind of anti-leakage earthwork synthetic material that applicable for artificial lake water, garbage landfill, underground garage, roof garden, pool, oil depot and chemicals yard and other places.
Why choose us
FAQ
Q : Are you a factory or trading company?
A : We are a professional manufacturer that specialized in geomembrane, geotextile, Composite Geomembrane etc with ISO9001 certificate more than 15 years.
Q : Where is your factory located? How can I visit there?
A : Our facoty is located is No.10 Yuanshan Road High-tech Development Zone, Laiwu District, Jinan City China. You can take the plan to Jinan Yaoqiang International Airport, then we can pick you up.
Q : Could you send the sample before order confirmation?
A : Yes, we'd love to send a free sample to you for an evaluation if you need.
Q : How about the delivery time?
A : General within 3-7 days after received the deposit.
Q : Can you produce the product according to customers' requirements?
A : Sure, we are professional manufacturer, OEM and ODM are both welcome.
Q : Are you the Gold and Assessed supplier on alibaba?
A : Yes. We are the gold and assessed supplier on alibaba and has got the factory report by SGS.
Geosynthetic Clay Liners Dam,Geosynthetic Clay Liner Bentonite,Bentonite Waterproof Pad Liner,Beontonite Natural Geosynthetic Clay
Shandong Jinruixiang Geotextile Material Co., Ltd , https://www.jrxgeosynthetics.com