0160R010BN4HC hydraulic filter tips

0160R010BN4HC hydraulic filter use skills as a filter company, each company has its own production area and scope, such as some filter manufacturers produce car filters are not producing cart filters, and some companies only Production of cart filters does not produce car filters.
As a professional filter manufacturer, our company has been producing the big car filter as the main production type since its establishment. At present, it produces hundreds of filter models and covers the filters required by common vehicles in the market. model.
The filter types currently produced by our company are: construction machinery air filter, heavy duty car air filter, cart air filter, car air filter.

Langfang Xiangxing Filter Equipment Co., Ltd.: Phone (WeChat) Synchronization is to reduce the frictional resistance between the relatively moving parts in the engine and reduce the wear of the parts. The oil is continuously delivered to the friction surface of each moving part. A lubricating oil film is formed and lubricated. The oil itself contains a certain amount of gum, impurities, moisture and additives. At the same time, during the working process of the engine, the introduction of metal grinding debris, the entry of impurities in the air, and the generation of oil oxides make the impurities in the oil gradually increase. If the oil is not filtered and directly enters the lubricating oil circuit, the impurities contained in the oil will be brought into the friction surface of the moving pair to accelerate the wear of the parts and reduce the service life of the engine.
Due to the high viscosity of the oil itself and the high content of impurities in the oil, in order to improve the filtration efficiency, the oil filter generally has three stages, namely the oil filter, the oil strainer and the oil fine filter. The filter is installed in the oil pan of the oil pump, and is generally made of metal mesh. The oil coarse filter is installed behind the oil pump and is connected in series with the main oil passage. There are mainly metal scraper type, sawdust filter type and microporous filter paper type. Now, the microporous filter paper type is mainly used. The fine oil filter is installed in parallel with the main oil passage after the oil pump, and mainly has two types of microporous filter paper and rotor type. The rotor type oil fine filter adopts centrifugal filtration and has no filter element, which effectively solves the contradiction between the oil passing property and the filtering efficiency.


Why change the oil filter.
The replacement of oil and machine filter is the two main contents of small maintenance of the car. Regular and timely maintenance is necessary. After a period of time, the oil will become dirty, and the viscosity and heat resistance will be worse. After a certain degree, the engine will not be able to protect the engine; after the oil filter is used to a certain extent, it will become dirty and its filtering effect will be worse. New oil and oil filters need to be replaced regularly. For the oil that has the car's blood, it will deteriorate after long-term use. If it is not replaced in time, it will increase the wear and even damage the engine. Therefore, it is recommended that the owners should change the oil in time according to the instructions of the owner's manual. In general, the oil should be replaced every 5,000 kilometers. When changing the oil, you must first release the deteriorated oil and then add new oil from the engine compartment. The maintenance cycle specified by different car manufacturers is not exactly the same. The specific replacement cycle is subject to the requirements of the automobile manufacturer. Since the oil needs to pass through the oil filter (referred to as the machine filter) to reach the lubrication part, the function of the oil filter is to enter The engine oil of the engine system is filtered to prevent the oil from clogging the oil passages and causing serious consequences such as damage to the engine during the use of impurities (dust, metal debris, and gelled substances formed by oxidation of the oil). At present, most cars use disposable filters that are not removable and washable. Therefore, in general, the machine filter should be replaced every 5,000 km to ensure good lubrication of the engine.