Knowledge: Steel Structure Paint Anti-corrosion Construction Process and Features
Steel structure paint anti-corrosion construction technology
1. Clean up the base surface, including oil, iron rust, welding seams, spatter, etc. at the steel structure. Secondly, check the steel structure first to ensure that it is a qualified product before the next action can be taken;
2, the next is the primer coating, the first time when brushing, the direction should be consistent, the first time after drying completely, then brushing the second time, the second time the direction of the first and the first Brushing is vertical, wait for 4 to 8 hours before reaching full dryness;
3, the third step is to spray the top coat, when spraying, it is best to keep the distance from the place to be sprayed, generally about 10mm; finally it can be checked and accepted.
Steel structure paint anti-corrosion features
1. The first characteristic of steel structure paint anticorrosion is that the environment it uses is rather harsh and harsh. However, in this environment, the paint anticorrosion performance is still not shaken for a long time, and has a very long lifespan. Anti-corrosion paints are applied in the chemical atmosphere and can last for 10 to 15 years. Even in solvents such as alkalis, acids and salts, they can maintain their service life for 5 years.
2. The second major feature of steel structure paint anti-corrosion is thick film. This thick film feature is also an important symbol of steel structure anti-corrosion. These features are also advantages of steel structure paint anti-corrosion.
See here, compared to everyone for steel structure paint anti-corrosion, it has been based on the understanding of it! Finally, the steel structure paint anti-corrosion need to pay attention to the paint coating after the show, its thickness is greater than the critical thickness, The coating thickness must be applied in accordance with different degrees of corrosion protection in order to achieve satisfactory results.
paint
Product detail:
Material :Natural slate, quartz ,sandstone ,marble etc
Size :15*60*(1.0-2.0) cm , 18*35*(1.0-2.0)cm ,15.2*61*(1.0-2.0) or 20*(60-5)*(2-4)cm ,and 10*(40-4)*(0.8-1.2)cm etc .
Shape :Rectangle ,interlock ,
Packing :Hard carton then fumigated strong wooden crate.
The wooden crate size is made as the container size . After loading the wooden crate in the container ,the wooden crates will nearly same size with the width of the container .It can make the wooden crate not have space to move during transport . In this case ,it can keep the stone safety mostly
Application : Can be used to decorate the outside wall or inside wall .Decorate your house ,decorate your life .
Water Stone,Water Stone Panels,Stack Stone Panel,Faux Stone Panels
HEBEI DFL STONE , https://www.dflstone.com