How to use and maintain pneumatic tools
The so-called pneumatic tool refers to a tool that uses compressed air to drive the air motor to output kinetic energy. It is a kind of hardware product that is often used in modern construction and machinery industry. With pneumatic tools, it will work for people in related industries. Convenient, but the performance and methods of pneumatic tools also need attention, how to use and maintain pneumatic tools? See how Xiaobian can help you!
Methods and techniques for using and maintaining pneumatic tools:
1. Guarantee the correct generation gas supply system: the inlet pressure is at the inlet of the tool (the outlet pressure of the non-air compressor) is generally 90PSIG (6.2Kg/cm^2). The performance of the tool is too high or too low. life. The air intake must contain sufficient lubricating oil so that the air motor in the tool is fully lubricated (a white paper can be placed on the tool exhaust to check for oil stains, which is normal for oil stains). The intake air must be free of moisture. If the air is not air-dried, it is not appropriate.
2. Do not arbitrarily remove the parts of the tool and operate it. In addition to affecting the safety of the operator, the tool may be damaged.
3. If the tool is slightly faulty or cannot be used to achieve the original function, it can no longer be used. Check it immediately.
4. Use all kinds of tools, be sure to follow the various safety regulations and instructions for use.
5, to use the appropriate tools to work, the tool is too large to cause work damage, too small tools can easily cause damage to the tool.
6. Regularly (about once a week) inspect and maintain tools, add butter to the rotating parts such as bearings, and add oil to the air motor.
Of course, in order to ensure that the pneumatic tools will not be damaged during use, Xiaobian recommends that if you do not operate the pneumatic tools at all, it is best to find professional personnel for construction and use.
Concerned about surprises
Label: How to use and maintain pneumatic tools
Previous: Do not buy this five-step wire and cable. Next: How to choose plate furniture hardware accessories
- Shantui,Shanghai,Pengpu,Hebei,XuanGong,Inner Mongolia Dadi,Zoomlion series Bulldozer,Daifeng Pipelayer Maintenance Service and spare parts .
- Shantui,Degong,XCMG,LiuGong,XGMA,SDLG,Wheel loader,Grader,Road Roller and Spare parts.
- CCEC,DCEC,Weichai Steyr,Shangchai,Xichai,Engine Unit and Diesel Generator set and spare parts.
- Komatsu,Cat,Hitachi,Volvo,Case,Sany,XCMG,SDLG,Lishide,etc spare parts, Maintenance and Multi-functional parts.
Bulldozer Engine Parts,Bulldozer Hydraulic Parts,Bulldozer Electric Parts,Bulldozer Structural Parts, Bulldozer Bearing ,Bulldozer Undercarriage Parts,Bulldozer Seal Ring.
We have rich experiences Maintenance Technical Engineer team,which means can provide Customs with highly efficiency Maintenance Services.In the past few years ,we have running the Maintenance services very well all over the world,solved the problems in time,because of our outstanding technical services for Bulldozer,Pipelayer,Excavator.
With the Independence Rights of Imp&Exp,Our business have covered every part throughout the country.Under The Belt and Road Initiative,International business also has developed to Russia, CIS countries,Middle east area,South America,Africa etc
Be Faithful to Our Original Aspiration and Continue Marching Forward,to achieve the Cooperation win-win target. Hand in hand with friends from Local and abroad,make the harmony and bright future is our Pursuit!
Bulldozer Undercarriage Parts
Bulldozer Track Link, SD22 Shantui Undercarriage, T170 OEM Carrior Roller Parts, T170 Track Roller For Bulldozer,SD7 Track Roller Single Double
Jining Changsong Construction Machinery Co., Ltd. , https://www.jncsmachinery.com