With the development of economy and the construction of new factories, people have paid more and more attention to the safety precautions of the factories and have taken many measures to protect the safety of the factories. The past practice was to install anti-theft nets, but there were also drawbacks such as impediment to beauty, easy detection of concealment by criminals, and failure to effectively prevent bad people from invading.
Now, the factories in all regions of the country are rapidly developing modern and intelligent anti-theft activities, and put forward higher requirements for security systems and monitoring systems among them. Because most factories are located in the suburbs, and there are few people around the plant during the day or night, it is easy for criminals to enter the plant from the wall. In order to minimize the accidental loss, it must have a special set of Safety equipment and operators to safeguard and manage the property safety of the plant area are not subject to any infringement. The safest and most effective method is:
1. Install wireless infrared sensors on the four surrounding walls of the factory. It uses infrared rays that cannot be seen by the human eye to form a protective net between them, which is safe and high.
2. Install an oversized siren about each side of the plant around the middle of the plant. Four siren are installed on the four sides of the plant. No matter which side is invaded, the siren on the side will immediately call the police and issue a huge siren. the sound of. The robbers are very guilty. When they hear such a big siren, they will scare the soul and fly away.
3, the police host must have someone to manage, when the alarm will display the alarm on the host area, the display of the zone represents the location of the invasion, so the alarm center must be on duty. So that the police can be dealt with promptly.
The requirements of the perimeter anti-theft alarm system in the factory are as follows:
1. Extensiveness ---- requires that every important part of the plant area be protected.
2. Practicality ---- It is required that each defense subsystem can promptly report an alarm in case of possible infringement. And requires easy operation, fewer links, easy to learn.
3. Systematic requirements ---- Each defense subsystem needs to have a police siren in that position in addition to the security monitoring center.
4, reliability ---- require the system to design a reasonable structure of durable products. System reliability.
PPGI And PPGL With Different Designs
PPGL Sheet,PPGI Sheet,PPGI Profile Sheet,Galvanized Roofing Sheet
SHAOXING YOTO IMPORT&EXPORT CO., LTD , https://www.sxyoto.com