Environmental protection flexibility and high value - how to maintain the pvc floor
[pvc flooring how to buy]
    The first point, first look at whether the PVC floor belongs to the store sales.
    Whether there is an authorization letter, whether there is an international quality certification certificate, a Chinese environmental labeling product certificate, and an authoritative certificate issued by the state functional department; whether there is an inspection report (some commissioned inspection reports are not true, it depends on the supervision and inspection or daily spot check inspection report). Originals. If not, it may be a low-quality PVC floor.
    Point two, look at the PVC floor surface pattern.
    Those floors with blurred texture, bad color, unnaturalness, and poor wood feel are not resistant to ultraviolet light and fading easily. These floors are undoubtedly low-quality PVC flooring.
    Point three, look at the core material.
    Those with rough core materials, dark colors, and easily broken edges on the PVC floor have formaldehyde levels exceeding the national excellent product standards, and most of the flooring composite indexes are unqualified and are inferior products.
    Point four, see the degree of grinding of PVC flooring.
    Use woodworking sandpaper to apply force to sand the surface of the floor for a few times. The low quality counterfeit products have traces of whitening, which is lower than the national standard wear resistance requirements.
    [How to maintain pvc flooring]
    1, sand protection: should be in the use of PVC floor prices at the entrance, the entrance hall to place a protective sand and gravel, to prevent the shoes will be brought into the room sand to the floor surface scratches;
    2. Handling of articles: When carrying articles, especially when there are sharp metal objects at the bottom, do not pull on the floor to prevent the floor from being injured;
    3, pyrotechnic protection: Although the PVC floor is a fire rating for the flame retardant grade (B1) floor, does not mean that the floor will not be burned by fireworks, so when people use PVC flooring, do not burn the cigarette butts, mosquito coils, charged Irons, high-temperature metal objects placed directly on the floor to prevent damage to the floor;
    4, regular floor maintenance: PVC floor cleaner using neutral detergent cleaning, can not use strong acid or alkali cleaner to clean the ground, do regular cleaning and maintenance work;
    a, routine maintenance: use clean 90% dry mop to clean the ground, to the local pollution of serious pollution;
    b. Month maintenance: ground cleaning, localized ground waxing. In particular, homogenous PVC floors are generally treated and cured once a month.
    5, pollution treatment: stained PVC on the floor of the ink, food, oily, etc. should wipe away the dirt, and then wipe the traces with a diluted detergent, the residue of the black leather shoes India is difficult to clear the veil can be used to touch the pine perfume scrub, can not be The pine perfume is poured on the floor to clean it.
    6, Note: Floor cleaning can not use clean ball, knife scraping, can not use conventional methods to clean the dirt, consult relevant parties, can not mess with the use of acetone, toluene, and other chemicals;
    7, chemical protection: to avoid a large amount of water stay on the floor surface for a long time, especially the block floor, homogenous floor, water soaked the floor for a long time, may seep into the floor below the floor glue to lose the adhesive force, it may also Makes the floor surface of the protective wax moisture layer cause floor pollution, and may also cause sewage to penetrate into the floor to cause floor discoloration (homogeneous floor);
    8, sun protection: Avoid direct exposure to bright light, make the floor to put ultraviolet radiation, to prevent the floor discoloration, fading.
    Xiao Bian concludes: How to maintain the pvc floor is introduced here for everyone, and I hope to help everyone. For more relevant knowledge, please continue to pay attention to this website information platform.
Pvc flooring prices pvc flooring construction kindergarten pvc flooring flooring maintenance floor mat
Engineering Veneer is a thin sheet of wood, rotary cut, sliced or sawed from expensive natural wood. The Veneer is easy to be edge jointed and overlaid on Plywood , MDF , particleboard and so on. So, it can be used in fancy plywood, fancy MDF, fancy Blockboard and veneer faced Particle board.We have Natural Engineering Veneer and Engineering Fancy Veneer
Luli Group Co., Ltd, also supply engineered wood veneers with good quality and competitive pricing.
Advantages of using veneers:
Compared to wood, one of the primary advantages of using veneer is stability. While solid wood can be prone to warping and splitting, because veneer is made of thin layers of wood glued together, the chances of splitting or cracking are reduced. Further, the glue used provides additional strength, making the end result stronger than natural wood.
Usages of Veneer:
Used to cover the surface of plywood, MDF, chipboard, blockboard and so on.
Specification details:
Sizes: 1220mm x 2440mm, 1250mm x 2500mm or as your request
Thickness: From 0.15mm to 0.6mm or as per request
Species: Okoume, Bintangor, Terminalia, Red hardwood, etc.
Grade available: A/A, A/B, B/B
Cutting way: Rotary cutting
Engineering Veneer
Engineering Veneer,Natural Engineering Veneer,Engineering Fancy Veneer,Engineered Wood Veneer
Luli Group Co.,Ltd. , https://www.cnluli.com