In general, the total cost of decorating should be 10% to 20% of the house price. At present, people are pursuing comfort-oriented, and the distribution ratio of material costs is reasonable: toilets and kitchens account for 45%, halls account for 35%, and bedrooms account for 20%.
The cost is 100 to 500 yuan/square meter for the low-grade decoration, 500 to 1000 yuan/square meter for the mid-range decoration, 1000 to 1,500 yuan/square meter for the middle-grade decoration, and 1500 to 2,000 yuan/square meter for the high-grade decoration , 2000 yuan / square meters for the super high-end decoration. You can click here to locate the decoration standards and estimate the required fees.
How to save money for decoration?
Save money principle: enough to use.
First, save money from the choice of materials
1. The general renovation is started from the plasterer. The only thing that can save money is the money from the tiles. The principle to save money is to buy bricks: As far as I know, the cheapest wall tile is the size 200x300mm glazed tile, of course, the density of the tile is still required, otherwise there will be the consequences of the penetration of cement from the back to the surface . Floor tiles are 300x300 non-slip tiles, which are generally less problematic. Of course, there is no reason to use non-slip bricks in these areas of the living room and bedroom. I suggest using vitrified tiles with strong anti-pollution ability. This money cannot be saved, otherwise there will be endless troubles.
2. If your carpenter uses mixed oil, you can use white wood veneer and lines, which is a very cheap material, although the surface is rough, but it can be considered a style thing. How much? Whitewood is half cheaper than Red Maple. This method of saving money is more expensive than running a broken leg everywhere you don't know.
3, buy what latex paint it five-in-one or three-in-one, regardless of the second generation or three generations. You just buy the ordinary goods of the more famous brands. Why do you say that? Because the "old fire" feels that they really do not have much difference, if you want to look at the durability of a few years later, it is better to make money in the past few years, and then pretend. Now many latex paint problems, are caused by excessive water, even the best material with more water, the nature is worse than ordinary goods.
4, buy a wooden floor, I think a lot of time is a mentality problem, if I use my own wooden floor, I prefer the color of the wood floor, cheap and natural texture. From the perspective of saving money, buying a 300x300 slatted floor would not be much worse than using a 760x95x18 floor, and the price would be several times worse.
Second, save money from the way of purchasing materials
1. Some people say that goods are better than three, yes, but it takes more time than goods, and time is money. So how to compare the law is to pay attention, otherwise you run around, sweating may not save much money. I think that you have to compare with only two companies. For example, if you choose a large-scale brand building materials supermarket and some modular building materials cities, you can just compare them. But do not buy goods in small shops. The probability of being pitted is too high. Although the same brand of goods will sell cheaper in small shops, it is very likely that the grade will be much worse. "Old Fire" once had such an experience: Once I went to a store on a building street to buy latex paint. The store's second child took out a bucket of paint from the shelves. I saw it as fake and I said: Really give it to me. The man yelled at the "old fire" (insert the word: "old fire" in the building materials city stroll, most people can not see I was doing decoration) very readily said: OK! So I took a bucket of new paint from the middle of the store to me. When I saw it, it was still fake. So very impatient to say to the owner: Take it and give it to me, don't waste my time. The owner immediately laughed and said: OK! Go to the warehouse immediately. Shop Xiao Er went out on a bicycle, and it took ten minutes before returning, and he brought a few buckets of new paint. Or is it fake?
2. Using price wars, the last player in the price war has always been consumers. Now some manufacturers often fight for price wars, which is exactly what they are doing. For example, when air conditioners are playing at a price war, this is a good time for the arrival of goods in the middle. We cannot expect them to buy the goods for nothing. Because at that time your home decoration may have been completed. The most important thing is that we can save. Province, how much can you save now?
3. Use off-season concepts for renovations. Different regions, the decoration of the off-season time is different, such as the southeast coastal areas, the off-season renovation has always been the plum rain season, this time decoration, often both materials and wages are lower, it is a good time to enter the market. As for whether or not Meiyu's impact on decoration is really great, to be honest, technically speaking, these effects have no significant impact except for the slow dry time.
4, centralized procurement, for concessions. If you buy some of the same kind of goods from an owner and buy something from the West, you may not even get the basic benefits. From a commercial point of view, whether the seller sells or sells the goods, the costs are all there, so earning less will not be much worse, the key is still more to sell, most of them are willing to give more benefits to large customers Measures.
5. When you buy materials, remember to take this manual. Maybe you don’t believe it but you can’t believe it. Now from Shenzhen to Beijing, many businesses across the country, including those who have renovated the company, bought or viewed the author’s “old fire†“The Complete Handbook of Decorationâ€. You hold it and many people do not. Dare to be jealous and open up in front of you. Even if the other person dares to make it, you can open the book immediately to check it out to avoid being deceived. If the other person says something outrageous, don't waste time and go straight for another business!
Third, save money from the design optimization
1. Good design allows you to spend money on ideas first. In the case of a limited budget, it is only by controlling the expenditure that the goals for making money can be achieved. On the other hand, the comparison process in the design can make some projects use some extremely cheap materials.
2. A good design can ensure that the money plan is guaranteed and avoid rework costs caused by unnecessary mistakes. For example, casual use of colors without design, and finally find it so difficult to see, had to rework corrections, which will virtually cause duplication of materials and artificial.
3. A good designer will also provide you with suggestions on the use of materials, analyze the pros and cons of different materials, and avoid the direct and indirect losses caused by errors in selection.
Fourth, save money taboo
1. Don't throw money while saving money. There are some people who tiled the provinces, provinces and provinces. On the other hand, they paid a large sum of money to buy a toilet with a few thousand dollars. To be honest, I think that there is little difference in quality between a toilet of about 1,000 or a toilet of 5,000 yuan. To save money, we must first overcome our own desires.
2, strictly control the budget. A clause should be attached to the contract: The project in the contract must not exceed x yuan in the final settlement. This clause is aimed at the bad budgets of some bad businessmen.
[How to save money by decorating]
â— The rationality of the design scheme is the key to saving money.
The budget plan can reasonably control the total renovation.
â— Reasonable use of materials can save money.
â— Excellent construction staff can improve the use of materials
[Decoration must not save money]
â—The money for electricity security cannot be saved.
â— Money for waterway reconstruction cannot be saved.
â— Money for door and window furniture hardware accessories cannot be saved â— Decoration and paste money cannot be saved.
Save money Renovation paint decorating design Latex paint toilet decorating Find Decoration Company How do you fit Living room Decorating style Flooring tiles Supermarket Shelves Bathroom Design Bathroom Wall Tiles Bathroom Tiles Bathroom Tiles Bathroom Doors Tile Tiles Tiles Tiles Tiles Tiles Tiles Tiles Floor Tiles
Ceramic components for semiconductor equipment have high requirements in terms of material purity, dimensional accuracy, mechanical properties, thermal properties, electrical properties, etc. Silicon carbide ceramics are a class of materials that have been proven in the market to have excellent performance for semiconductor equipment components. FLK has achieved a breakthrough in the manufacturing technology of silicon carbide ceramic components for semiconductor equipment by using additive manufacturing technology. It is a product with high purity, high temperature characterization, high thermal conductivity, high temperature resistance, and excellent friction and wear resistance, and can meet the needs of many application scenarios of ceramic parts for semiconductor equipment. This series of products, with short production cycle, standardized batch, and can achieve a more suitable for the semiconductor industry efficient and high quality production of differentiated structure.
Semiconductor,Silicon Carbide 3D Printing,Customized 3D Printing,3D Printing Service Semiconductor
Ningbo FLK Technology Co., Ltd. , https://www.flk-global.com