Aluminosilicate: It is produced by using hard clay clinker as raw material, melting or blowing into fiber by electric resistance or electric arc furnace.
Characteristics: Low thermal conductivity Excellent thermal stability and chemical stability without binders and corrosive substances.
Aluminium silicate application: the interlayer filling of the equipment, the fiber castable, and the raw material of the coated raw material vacuum forming product.
Aluminum silicate is an aluminosilicate.
Traits: colorless crystals.
Chemical formula: Al2(SiO3)3
Relative molecular mass: 282.23
CAS No.: 12141-46-7 [1]
Solution: do not dissolve in water.
Uses: Used in glass, ceramics, and as paint pigments and fillers for paints, rubber and plastics.
Preparation or source: present in the soil. Alumina and silica can be mixed in a ratio and then sintered.
Remarks: The ratio of alumina to silica is not constant, 1:1 aluminum silicate, density 3.247, melting point 1545 ° C (decomposition). 1:3 silica, density 3.156, melting point 1920 ° C.
Category: Inorganic salts
Flash point: 800 ° C
Application of aluminum silicate
1. Fillers for glass, ceramics, pigments and paints;
2. It is an ideal substitute for titanium dioxide and high-quality kaolin in coatings. It is widely used in paints, leather, printing and dyeing, ink, paper, plastics and rubber.
3. It is used to make high temperature resistant fireproof insulation cotton, board, pipe, seam felt, fire insulation cloth, high temperature resistant paper, fire resistant insulation rope, belt, fire insulation needle acupuncture blanket (with silk, spray), brick , inorganic fireproof decorative board. Inorganic fire shutters, etc.;
4. Used as a filler for adhesives and sealants to improve hardness, whiteness, abrasion resistance, weather resistance and storage stability.
Recessed LED Downlight with built-in Microwave Motion Sensor
| Model | AM-6.0GY |
| Luminous flux | 800~900lm |
| Luminous Efficacy | >80lm/W |
| Colour Rendering index | 80 |
| Beam Angle | 140° |
| Light Decay | <30% over 10,000 hours |
| Rated Lifespan | >30,000 hours |
| Power consumption | 10 watts |
| Input voltage / Frequency | 80-260vac 50-60HZ |
| Reflector / Diffuser | Frosted diffuser |
| Operating Environment | -20°c~+50°c |
| Dimensions | Φ193*77mm |
| Hole Cut Size | Φ160~Φ180mm |
| LED Source | 56pcs SMD2835 |
| Working mode | ON/OFF or Full/Dim |
| Sensor Range | 180*360 degree |
| Sensor Distance | 6-8m Radius |
| Delay Time |
18-25s |
Solar Power,Solar Portable Power Station,Solar Power Panels,Solar Portable Power Station Camping
JIANGMEN MOSCOT OPTOELECTRONIC TECHNOLOGY CO.,LTD. , https://www.sensorsled.com