Winter Indoor Insulation Cold-proof Starting from the window Choosing more insulation on window profiles
I remember that when I was young, I was cold in every winter day and my father stuck a plastic sheet on the outside of the window to keep warm... Now my life is getting better and better. There are also many ways to keep warm in winter. There is no doubt that the thermal insulation function of the window plays an important role, and the material of a window frame, the thickness of the glass, the degree of sealing, and even the shape of the window determine whether it will allow you to spend a warm winter. In this issue, Xiao Bian will introduce to you in detail the method of winter window insulation and cold protection. Let's understand it together.
How is the window frame more resistant to cold?
1, preferred to use broken bridge aluminum alloy
According to the window frame material classification, the current aluminum alloy window and plastic steel window are two common mainstream windows, if the insulation and cold resistance, first inferred the bridge aluminum alloy window. It combines two layers of indoor and outdoor aluminum alloys, which are separated and tightly connected to form a new, heat-insulating aluminum profile, which improves the thermal insulation performance of the bed. Its airtightness is better than that of any aluminum or plastic window. , It can ensure that there are no dust in the indoor sill and floor in the large sandstorm area.
2, plastic frame material can be added to the plastic
The disadvantage of the plastic frame is that it is easy to use the air for a long time, and the gap at the interface is too large to be bonded. The best way to do this is to use a sponge to stick around the windows, and then cover the entire window with plastic. The plastic absorbs heat and is airtight, and the temperature is kept very good.
3, aluminum package wooden frame pay attention to the quality of paint
Aluminium wood windows are covered with a layer of aluminum alloy in addition to solid wood, so that the doors and windows are more tightly sealed, which can effectively block the invasion of wind and sand. In the cold winter, they will not freeze or dew, and noise can be rejected. Outside the window. However, the conservation of wood needs more thoughts, especially paying attention to the quality of painting the wooden frame and avoiding the leakage of corrosion.
Second, how to keep glass warm?
1, preferred to use vacuum glass
Vacuum is similar to insulating glass, but its insulation performance is better than that of insulating glass. Because the two glass plates in the middle of vacuum glass are closed, the space between them is evacuated and the vent hole is sealed. The gap between the two glass plates is 0.1-0.2mm. , smaller than insulating glass, heat preservation effect is very good, but the price is more expensive.
2. Insulating glass needs double seal
Insulating glass is moderate in price and has better heat preservation performance and is therefore used more widely. The general requirement for selection of the hollow glass is 12mm hollow distance, and both sides of the glass should have a thickness of 4 to 5mm. There are two sealing structures for insulating glass: single-channel sealing and double-channel sealing. It is recommended to use dual-channel sealing. The first sealant can prevent water vapor from inflicting, and the second sealant can maintain the stability of the structure and continue to maintain heat.
3, single-layer glass plus windows
There are many windows of old houses, and single-layer glass is used, and the insulation effect is not good. If the original single-glazed glass is changed to double-glazed glass, the specification of the profile may not be the same. Second, after adding the glass to increase the weight of the window, the window may become difficult to push, so it is advisable to replace the window; if The windows are open to the outside and a layer of windows can be added inside the room. The windows are open towards the inside and can be added with a layer of sliding windows on the outside. Double-glazed insulation can be achieved with two windows.
Bay window, windows, doors, windows, balconies, windows, large bay windows
CROWN ELECTRONICS CO., LTD. was established at year 2007 and Our Headquartered in Taiwan Taipei.Our main products is DC Axial Fan 92x92x25,Server DC Fan A8 Electronic,Protection DC Fan.
Crown fan are used for 9225 Twin rotation Crafts and laptop Construction DC FAN,etc.
DC Axial Fan 92x92x25,Server DC Fan A8 Electronic,Protection DC Fan
Crown Electronics CO., LTD , https://www.crownelectronicstw.com