What are the acceptance criteria for marble drying steps?
Stone dry hanging is also called empty hanging method, which is a new type of construction technology in the decoration of decorative materials. It hangs the stone directly on the wall surface with metal pendants, and no need for grouting. Therefore, the operation is simple and convenient. So what are the marble drying steps and what are their acceptance criteria? You can check it out!
What are the marble drying steps ?
1. First cut and hang the mouth, and make a mark on the two 80mm sections of the brick.
2. Place the plate in the cutting machine and place a knife at the scribe line. Cut the plate to a distance of about 25 mm from the standard line. Then cut them.
3. The upper section of the incision is dominated by a flat shape, and then this small square is carefully knocked off with a hammer to form a semi-open mouth shape.
4. Then hang the pendant, (the mounting hole of the pendant needs to be pre-opened, and the distance between the ends of the brick is reduced by 80mm)
5. In the lower part of the brick, it is necessary to use a gasket to make it easy to fill in the waterproof glue, and it can also play a role in adjusting the levelness of the stone.
6. Afterwards, adjustments are made to adjust the pendant locally. The wooden wedge adjustment can be applied when the position is rotated.
7. To reconcile the AB glue, remember that it is more viscous than the usual household. Wait until the position of the marble plate has been adjusted. Then gluing, fill the gap and fill the plastic to fill the semi-open square.
8. After the upper end of the glue is completed, use AB glue to completely cover the nuts of the fixed pendant, and you're done!!
What is its acceptance criteria?
1. Check the surface finish
Acceptance of the marble dry hanging standard first is to check the surface finish, you can feel the stone surface finish by hand. In general, the finer the mineral particles, the more compact and strong the structure of the mineral particles is, and the uniform fine material structure of the stone has a fine texture, and this stone effect is also better.
2. Look at the appearance quality
Then look at the quality of stone appearance, you can use the naked eye to see, simpler, because the quality of stone will not have missing corners, cracks, stains, so the stone is good or bad, one can see it. In addition, check whether the patterns and colors of a batch of plates are the same, because the color will affect the effect after the pavement.
3. Size and size
In the acceptance, it is also necessary to measure the size of the stone, so as not to affect the splicing, or cause the spliced ​​pattern, line deformation, affect the decorative effect.
Listen to the sound
Finally, you can listen to the sound and listen to the sound by striking the surface of the stone. The sound of a good-quality stone percussion is crisp and sweet. On the contrary, if there are problems such as cracks in the interior of the stone, the knocking sound is coarse and dumb.
Regarding the marble hanging steps and the content of the acceptance criteria, everyone has already understood it! In fact, the marble hanging steps are easy to listen to. Generally, if you follow these practices, you will be able to complete them. Parents may wish to try!
ECC Reducer,Carbon Steel Fitting Concentric Reducer,Seamless Carbon Steel Butt-welding Fitting,Carbon Steel Forged Pipe Fitting Reducer
Cangzhou Youlong Pipe Fitting Manufacturing Co., LTD , https://www.ypco88.com