Renovation is a very troublesome thing, especially in the bathroom renovation, where easy to overlook. The bathroom decoration is mainly not for the beauty of the decoration, the functionality is the main consideration. There are many precautions in the decoration process of the bathroom. Xiaobian specially collected a series of precautions for everyone to use for your reference!
1 Leave a little space for the ash of the shoes to leak to the bottom, and install the lights above the sink and gas stove. When you want to locate the floor drain of the bathroom, you must first think about it and measure the size.
2. Bathrooms, air-conditioning outlets are not designed switches. Especially the bathroom electric water heater, with a two-stage switch with a plug is appropriate. If you want to turn off the electric heat, pull the plug is dangerous.
3. Regarding the treatment method of the corner of the brick, in the final analysis, it is to see the level of the worker. If the level of muddy workers is good, and the tools for grinding tiles are better, you should not hesitate to choose a 45 degree angle.
4. It is also very important to test the water pressure after the water pipes are drained. When testing, everyone must be present, and the test time is at least 30 minutes, and the conditions are allowed, preferably one hour.
5. When the steel door is made, it must be considered that the size of the steel door frame protrudes from the wall, and the installation personnel are informed that the final door frame and the wall of the finished tile are flat, so that it is both beautiful and sanitary.
6. The wood door and the mason's tiling are also to be matched. When the door is covered, it is necessary to consider whether the ground below (either side of the door on both sides of the door) is to be tiled or other cement mortar to level things.
7. Be sure to breathe under the mattress and on the bed. The bed board is generally best with fir boards.
8. Make paint as much as possible with paper tape.
9. Pay attention to the purchase of lamps: generally try to use glass, stainless steel, copper or wooden (shelf), generally do not buy what iron plating on the other plating, what paint, and so on, easy to fade.
10. Wash basins as much as possible with ceramic basins.
Professional Aluminum Machined Parts manufacturer is located in China, including Sheet Metal Parts Stamping,Decoration Lamp Accessories,Casting Decoration Lamp Accessories, etc.Aluminum Machined Parts,Sheet Metal Parts Stamping,Decoration Lamp Accessories,Casting Decoration Lamp Accessories
Aluminum Machined Parts,Sheet Metal Parts Stamping,Decoration Lamp Accessories,Casting Decoration Lamp Accessories
JIANGSU TONGDE INTERNATIONAL TRADE CO.LTD. , https://www.tongdetrade.com