Insulating gloves are a kind of protective gloves for protecting the hands when they are to be operated on DC electrical equipment with AC voltage of 10kV and below and 10kV voltage.
Insulating gloves must have good electrical properties and high mechanical properties, hardness of 30 ° to 35 °, and have soft properties. And it should meet the requirements of GB17622-1998 "General technical conditions for insulating gloves for live working", the main technical indicators are:
1. Electrical performance Insulating gloves must have good electrical insulation properties. The test voltage waveform, test conditions and test procedures should comply with the provisions of BG/T16927.1-1997.
2. Anti-aging performance After the heat aging test, the measured values ​​of tensile strength and elongation at break of the insulating gloves should be more than 80% of the values ​​measured without the heat aging test gloves. Tensile permanent deformation should not exceed 15%.
3, low temperature resistance Gloves according to the specified method after the low temperature test, under the force of the situation, there should be no breaks, cracks and damage after visual inspection, and should pass the insulation test without moisture absorption treatment.
4. Flame resistance After the flame has passed the burning test according to the specified method, the flame spread of the burning test flame on the glove is observed after the flame exits. Wait 55s, if the burning flame does not spread to the 55mm reference line at the end of the glove, it is a qualified product.
5, mechanical properties a, tensile strength and elongation at break The average tensile strength of the glove should not be less than 14MPa, the average elongation at break should not be less than 600%
b. Tensile permanent deformation The deformation should not exceed 15%.
c. Anti-piercing force The mechanical piercing force should not be less than 18N/mm
With these guarantees, quality protective gloves can be made.
This article is from: http://
Cordless Circular Saw
The 20V Cordless Circular Saw is Perfect for Cutting Wood, especially on Bevel Cutting and Straight Cutting, compared to the Jig Saw.
The 20V Cordless Wood Working Circular Saw is convenient to use at anywhere, wireless power supply, 4Ah and 2Ah Battery is rechargeable.
4Ah battery can cut around 30m wood.
This Cordless Power Tool is designed friendly, can be used by Left or Right Hand.
It is a cordless wood cutting power tools that users feels much better, compared to jig saw.
The Cordless Wood Working Power Saw with single speed 4000rpm, Laser Function, Bevel Cutting 45°, 55mm cutting depth at 90 Degree, 36 cutting depth at 45 Degree.
The Cordless Circular Saw With a dust blower for max cut -line visibility.
The Cordless Wood Cutting Power Tools with protection button for your safety, soft rubber handle for comfortable use.
Cordless Circular Saw,Portable Circular Saw,Cordless Circular Saw With Battery,Hand Circular Saw
Ningbo Brace Power Tools Co., Ltd , https://www.bracepowertools.com