Renovate those things on the wall
In the renovation, the brightest part of the building is probably after the construction of the wall. The walls of the rough house were in a mess. After the painting, they were completely new and they had their own home. 
In the refurbishment of second-hand houses, the important part of the old house is refreshed in the second spring. The most important thing is that there will always be such problems in the walls of the old houses. In the renovation project, the refurbishment of the walls may be heavy. The most important thing is that Xiaobian and everyone talk about the renovation of the wall. 
one. Cracking and Peeling of Wall Coatings Cracking and spalling of old house wall paints are common. The main reason is that the paint is too hard or has become brittle due to aging. In addition, inferior paint is used when painting. 
However, if the wall surface treatment is not good enough when painting, for example, the putty is very thick, loosening will cause the problem of cracking and peeling, and the cracking of the substrate will also cause cracking of the paint film. 
Solution: First remove the cracked and peeled paint with a brush or wire, and then sand it until it is smooth. If a lot of layers are peeled off, it is best to level the surface with a putty after sanding. 
After polishing, it is necessary to repaint the paint. When repainting, it must be noted that in order to avoid the color difference between the newly brushed paint and the original paint, it is better to try to paint on the plasterboard first. Compared with the original wall, this can reduce the appearance of color aberration. 2. Mildew on the wall In the wet south, the wall of the old house is easy to mold. This phenomenon may be due to the fact that the bottom of the gypsum has empty drums and shells due to water vapor, and it may also have a water source in moldy parts. 
Solution: Sometimes the mildew on the wall is due to local mildew caused by climatic factors and is not very serious. You can do a simple treatment. Wipe off the mold area with a damp cloth. Then wipe it several times with bleach to remove mold and let it dry. After that. 
"However, if there is a large moldy area on the wall and there are multiple layers of mildew, it is recommended that some parts be wiped off after removing the moldy surface. First, the moldy surface should be removed; the surface should be smoothed with sandpaper, etc.; Repaint the surface. 
3. There are many reasons for the flouring of the wall flourization. There are five main reasons: First, the temperature during construction is low; Second, the wall powder is diluted in excess; Third, the coating is too thin during construction; Fourth, no primer is used; The fifth reason is the looseness of the substrate. 
Solution: Remove the chalked part until it comes out with a solid base, then re-paint it in accordance with the high-quality brushing scheme. Fourth, more and more shiny do not think that the more shiny the wall the better, the increase in gloss is mainly due to frequent scrub, or objects across the wall will also cause the wall to be polished smooth, so that the surface gloss increased And there is poor scrub resistance of the coating used. 
Solution: If you have such a problem with the wall of the second-hand house you purchased, then you should completely repaint the wall.
Wall paint wall paint wall construction
A floor lamp is a tall lamp that stands on the floor and provides lighting to a room. It typically consists of a base, a long pole or stand, and a lampshade or light fixture at the top. Floor lamps can be used for general lighting or as a decorative accent in a room. They come in various styles, sizes, and designs to suit different interior décors and lighting needs. Some floor lamps also have adjustable features, such as adjustable height or angle, to provide flexibility in directing the light.
Floor Lamp,Modern Floor Lamp,Floor light,Modern Floor light,Standing lamp
Zhongshan Seekyo Lighting CO., Ltd. , https://www.seekyomodernlamp.com