1. Correct selection of products: Before use, confirm whether the mechanical properties of the product can meet the requirements of use, such as the tensile strength of the screw and the guaranteed load of the nut. The length of the screw should be properly selected to tighten the nut and expose the nut 1-2 teeth.
2, check whether the thread is rough before use, whether there is iron filings or dirt between the threads, these things often lead to lock.
3, the fastener can be lubricated before use: it is recommended to use butter, molybdenum disulfide, mica, graphite or talcum powder for lubrication, the current use of wax treatment to do lubrication and anti-lock.
4, pay attention to the use of:
a. The speed of the screwing should be appropriate. Do not use it too fast. Use a torque wrench or a socket wrench as much as possible to avoid using an adjustable wrench or an electric wrench. Too fast will cause the temperature to rise rapidly and cause lockup. Imported pump valve
b. The direction of the force applied, the nut must be screwed perpendicular to the axis of the screw.
5, the use of gaskets can effectively prevent the problem of over-tightening.
6, lock or bite often occurs in stainless steel, aluminum alloy and titanium alloy fasteners, these metal alloys have anti-corrosion properties, will produce a thin layer of oxide on the metal surface when the surface is damaged To prevent further rust. When the stainless steel fasteners are locked, the pressure and heat generated between the teeth will damage the oxide layer, causing blockage or shearing between the metal threads, and then sticking. When this phenomenon continues, the stainless steel fasteners will be completely locked and will no longer be able to be removed or remain locked. Usually a series of blocking_clip_adhesive_locking actions take place in a few seconds, so correct understanding of the use of such fasteners can prevent this phenomenon.
A bidet seat is a bathroom accessory that is designed to enhance personal hygiene and comfort. It is a seat-like attachment that can be installed on a standard toilet, replacing the existing toilet seat. A bidet seat is equipped with various features and functions to provide a more thorough and convenient cleansing experience.
The primary purpose of a Smart Toilet seat is to provide gentle and effective cleansing after using the toilet. It uses water jets to spray a controlled stream of water onto the user's intimate areas, replacing the need for traditional toilet paper. This not only ensures a more hygienic clean but also reduces irritation and discomfort associated with wiping.
Smart bidet seats often come with adjustable water pressure and temperature settings, allowing users to personalize their cleansing experience according to their preferences. Some models may also offer additional features such as oscillating or pulsating spray modes for a more comprehensive clean.
In addition to cleansing, bidet seats may offer additional functionalities for enhanced comfort. Many models are equipped with a heated seat, providing warmth and comfort during colder seasons. Some bidet seats also feature air dryers that eliminate the need for toilet paper altogether, further reducing waste and promoting environmental sustainability.
The installation of a bidet seat is typically straightforward, requiring only basic plumbing skills. Most bidet seats can be easily attached to the existing toilet bowl using mounting brackets and connecting hoses. Some models may require access to a nearby electrical outlet for certain features like seat heating or air drying.
Bidet Seat,Toilet Seat Cover,Bidet Toilet Seats,Toilet Seat, Smart Toilet Seat
Guangdong Fabia Intelligent Technology Co., Ltd , https://www.nbsmartfabiatoilet.com