In winter, the primary problem for every family is to do a good job of anti-freeze measures, but some families are due to decoration reasons, such as the window will be a problem of air leakage, this time we must find some appropriate treatment to solve. The following Xiao Bian will tell you about how to make plastic window ventilation and what type of material is durable.
Plastic window ventilation how to do
1, how to do the plastic window ventilation , the first is to see what causes the window leakage, if it is the window gap is too large, then you can use the sealant to fill the gap full, in general, so there will be no wind.
2. If there is no problem in checking the glass size, it is possible that your glass is not reinforced, so that it will appear to shake back and forth, so that the outside of the natural wind will come, and then you can use glass sealant and The gap between the windows is filled so that it can reinforce the glass.
3, always feel that glass wind will come in, then you can choose a relatively thick curtain hanging, this will not only block some wind, but also make your house feel warmer.
4. If it is found that the crevice of the window's air leakage is left over from the installation, the measure that can be taken at this time is to first put the window frame and the door cover, and also to clean up the gap in the wall, this time Use styrofoam plugs in, then use cement and sand to fill in the gaps, and finally do some repairs.
5, there is a very important reason for window leakage, that is, some failures of the seal fittings. In general, the more common problem is that the seal will crack when it ages, which will directly lead to the deterioration of the sealing performance of the window. There is also a possibility that the styrofoam is too soft. This will happen after you use it for a few years. The occurrence of chalking will also cause the gap between the window frame and the wall to become larger. If the time is long, air leakage will occur.
Which material is durable?
1, wooden
The window frame of wooden material is processed on the spot. This kind of effect can be made to fit. However, because this material is a wooden material, its waterproof and fireproof performance is relatively poor. At present, there are fewer families to use.
2, steel
The use of steel material is relatively strong, so it is inconvenient to say that it is to be processed on the spot. Therefore, this kind of material may have the problem of fit of the window frame, which is likely to cause a relatively large gap. .
3, aluminum alloy material
Aluminum alloy material is because of its physical properties of the characteristics of rapid thermal conductivity; so that when this product in the winter, relatively speaking, the insulation will be relatively poor, that is, prone to the kind of gap phenomenon In order to prevent this from happening, the number of people currently using it is also relatively small.
4, plastic window frame
The sealing performance of the plastic window frame is relatively good, but this is the opposite effect of the aluminum alloy window frame. The material has low thermal conductivity, so it can be effectively used to ensure the indoor temperature. Its sound insulation is also very good.
Summary: With regard to how to make plastic window ventilation and what kind of material durability of plastic window is related to this, plastic steel window is currently used more than one, this material has many unique characteristics, but no matter which material is used, use It takes a long time to have problems, but it is easier to find the causes.
Indoor Rental LED Display,Indoor Rental LED Screen
SHENZHEN YGHQ Optoelectronics Co.,ltd. , https://www.leds-smd.com