The needle-like structure of the titanium carbonitride (TiCN) coating is closely associated with the alumina coating, which both enhances the heat resistance of the insert and improves its wear resistance.
The needle-like structure of the inserted TiCN coating enhances the good adhesion to its outer aluminum oxide coating, which is reminiscent of the “nano-Velcro†material. The TiCN coating prevents surface wear while the alumina coating has heat resistance.
TiCN materials are commonly used as coatings for knives and indexable inserts. In fact, according to Reinhard Pitonak, research and development engineer at Boehlerit (one of the six LMT Group companies), more than 90% of all indexable inserts are processed by chemical vapor deposition (CVD). There is at least one layer of TiCN deposition coating thereon. Mr. Pitonak said that the main reason for using TiCN coating is to prevent the wear of the insert. Mr. Pitonak explained that TiCN coatings containing carbon particles and nitrogen particles – ranging in size from 50 to 300 nm – have good wear resistance. To this end, Boehlerit developed the TiCN coating using particles with a particle size of only 25 nm. The company found that particles of this size were processed using extremely high temperature CVD coatings to form a very unusual TiCN surface structure with exceptional properties.
The nanocrystalline coating formed has a needle-like surface structure. The company referred to this TiCN coating surface as a nano-locking layer that tightly "locks" the aluminum oxide coating on the outside of the surface. The strong adhesion between the two coatings makes it virtually impossible for the alumina coating to fall off during the cutting process, while the alumina coating prevents the tool from generating excessive heat during processing. Mr. Pitonak said that the wear resistance of the TiCN coating combined with the heat resistance of the alumina coating allows the user to achieve higher cutting speeds in the cutting process and extend the life of the insert.
Nanolock technology is currently used in Boehlerit's LC 228E universal bar roughing inserts, LC 239Q crankshaft inserts and Steeltec rotary inserts. By comparing the Steeltec LC 215K Nanolock inserts with conventional inserts, the Steeltec inserts have a continuous cutting speed of over 300 m/min and a 50% longer life when machining 4140 steel.
The most important thing to our customers is that they keep their excavators working reliably and efficiently. This means that when you are carrying out servicing and maintenance you want quality Sumitomo Excavator Parts that are compatible, reliable, readily available, and provide long service life.
We can supply Final Drive motors for a wide range of Sumitomo excavators. See the list below to find the model of your Sumitomo excavator and if it is not among the models listed, please don't hesitate to contact us. We sell our final drive motors al wholesale prices because we import large quantities direct from manufacturers without intermediate dealers, thus we can provide spare parts for our products easily. For a free quotation and further details, please fill in the form. Our sales department will contact you within the shortest delay.
All our Sumitomo parts are designed and manufactured in our China factories or are sourced from leading global manufacturers with a reputation for high quality products.
We also offer fast delivery and strong follow-up support for your Sumitomo Excavator parts, thanks to eight China warehouses and our comprehensive Cutting Edges Warranty on all parts.
With solutions available for over 220 Sumitomo excavator models, we are sure to have the Sumitomo final drive or Travel Motor you need.long-standing final drive provider.and 15 month warranty on final drives.
Sumitomo Final Drive,Sumitomo Final Drive Assy,Sumitomo Travel Motor,Sumitomo Travel Gearbox,Sumitomo Final Drive Spare Parts,Sumitomo Drive Parts,Sumitomo Motor
Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.sdjuhengmachine.com