Monitor use attention and maintenance collection

Note on the use of the monitor
First, avoid collision or friction between the monitor and some hard objects. Because the monitor product is relatively fragile, its resistance to "shock" is also very small. Many crystals and sensitive electrical components will be damaged when subjected to an impact. It is easy to cause harm to objects.
In addition, you should be careful when cleaning the screen. Do not spray the cleaner directly on the screen, because these liquids may flow into the screen, causing a short circuit and affecting the use. Instead, spray the cleaner onto a soft, clean cloth, and then wipe the screen to avoid danger.
Secondly, if you accidentally spray the cleaner onto the screen, you do not need to worry too much when the liquid of the cleaner is injected into the screen. If you find that only the surface of the screen is fogged before turning it on, gently wipe it off with a soft cloth. If the moisture has entered the LCD monitor, put the LCD monitor at a slightly higher temperature than the table lamp, such as under a desk lamp , Gradually evaporating the water inside.
Third, it is best not to use screen savers. why? Then look down and you will know. Because the core structure of the LCD monitor is similar to a "sandwich", it is two glass substrates filled with moving liquid crystal molecules. The signal voltage directly controls the switching state of the thin film crystal, and then the transistor is used to control the liquid crystal molecules. The liquid crystal molecules have obvious optical Anisotropy can modulate the light emitted from the backlight tube to realize the display of images. A complete display screen is composed of many pixels, and each pixel is like a transistor that can be switched.
Finally, I would like to tell you that if there is a problem with the LCD monitor product, do n’t disassemble the product without permission, because the interior of the monitor will generate high voltage, and people who do n’t know will not only have a certain danger when disassembling the monitor. , It is also easy to increase the failure of the monitor, so when problems occur, you must call Shenzhen Weiguan Vision in various after-sales newspaper centers to call to consult, so as not to cause unnecessary trouble to you.
Monitor maintenance knowledge
1. When using the monitor, avoid frequent startup and shutdown. Otherwise, it is easy to damage the LCD tube and shorten the service life of the monitor.
2. Avoid placing the monitor near a heat source or direct sunlight to avoid accelerated aging.
3. Avoid using plastic cover to cover the monitor. When using it, the anti-sharp cover or shielding cloth should be fully opened to facilitate heat dissipation.
4. Avoid leaving the monitor unused for a long time, especially in spring and summer, it is best to open it several times a week to avoid reducing the insulation performance of electronic components due to moisture.
5. The monitor should avoid working with illness. If you find that the monitor image flickers, the brightness becomes brighter and a white retrace line appears, ozone smell inside the machine or internal fire, abnormal sound, etc., you should stop using it immediately and repair it in time.
6. The monitor is susceptible to magnetic field interference, and the monitor cannot be used together with other electrical appliances.
7. Don't let the monitor work in the standby state for a long time, you should turn off the power.
8. The monitor is particularly easy to absorb dust, so it should be placed in a clean and well-ventilated environment.
9. Do not place the monitor in a sealed cabinet, pay attention to heat dissipation during monitoring.
10. Do not scratch or hit the display with a hard object, because the surface of the liquid crystal display is a polarizing film. If you use a pen or a hard object to scratch, it is easy to scratch the polarizing film and affect the display effect.