Magnetic separation experts tell you how to use magnetic separator

1. If the material to be selected is pulp, use a wet magnetic separator. The grade of the ore itself is high, and a magnetic separator with a low magnetic field strength (general magnetic field strength is 1400-1600GS can be used); the product of the ore itself is not high enough. Use magnetic separators with higher magnetic field strength (usually above 1600GS). You can also use the two together and use the high magnetic field as the first rough selection. If you use the second choice with low magnetic field strength, the effect will be better.

2. If the mineral to be selected is ore, in order to save water, a dry magnetic separator can be used, which can save water and environmental protection without pollution. Dry magnetic separator has strong processing capacity and is not limited by the environment. Generally, dry magnetic separation minerals also need to determine the magnetic field strength of the magnetic cylinder surface according to the magnetic properties of the magnetic cylinder. If the magnetic properties of the mineral itself are weak, a strong magnetic dry separation machine can be used for sorting, which is mainly determined according to the mineral analysis and analysis report. The determination of dry magnetic separator model is based on the user's processing volume to determine, according to the different beneficiation production and quality requirements to determine the configuration of different specifications and models of dry magnetic separator.

3. In addition, Gongyi Chengxin Magnetic Separation Equipment Factory can also design magnetic separation process flow according to different needs of users and configure a full set of magnetic separation equipment production lines. Users can design standards and non-standard products and mass production.