How to make eye on the tiles? What are the precautions?
I believe that many of my friends will encounter such a thing in the decoration. After the kitchen or bathroom wall is completely tiled, I found that the shower, five pendants, the hood, the water heater, etc. all need to be punched and not installed. This can be broken. You can only use the tile drill bit to make a hole on the tile. However, for many decoration whites, it is easy to cause the tile to crack if you don’t pay attention to it. You don’t know what kind of tile bit to choose, and the expensive tile. I will give up all my efforts and be stunned. I can’t start today. Today, Xiaobian will talk to you about the problems related to tile drill bits. I hope I can help you.
First, how to make eye on the tiles?
1. First of all, you need to find out that there is no water pipe or circuit line behind the eye-catching position. After that, mark the position that needs to be eye-catching. It can be marked with a marker, etc., and it plays a prominent role, and the sealing tape is attached at the marked position. Steps are very important and must be done well.
2. Next, prepare Yang Chong and Shantou, and punch out a small hole of about 2-3 mm at the position where the sealing tape is attached. The enamel on the surface of the tile can be removed. Otherwise, the tile surface is too smooth and not easy to win.
3. Then prepare the drill bit that matches the size of the hole, align the punch point, start the impact hammer, just the right force, slowly penetrate the tile until you drill enough depth.
4. Finally, the expansion screw is installed in the hole that has been punched.
Second, how to prevent cracking of tiles?
Tips1: Drilling at the place where the wall tiles are handed over will greatly reduce the cracking of the tiles.
Tips2: Do not choose the place where the tile is raised from the drum. If you just choose to hit the eye at the tile, the tile is likely to crack.
Tips3: When you are eye-catching, spray a sufficient amount of water at the location where you will be eye-catching. When the eye is punched on the tile, the temperature of the eye-catching portion rises sharply, which tends to cause cracking of the tile, and the water spray can appropriately lower the temperature of the tile and reduce the possibility of cracking.
Third, the tile drill bit to pay attention to matters
1. When punching a full tile, you need to add water while playing, and you can only play when the tile is cooled. This can prevent the hole from heating and cause the tile to crack.
2. For drilling the tile for expansion bolts, the width of the hole should be selected according to the size of the bolt.
3. When punching, be sure to stick the sealant on the surface of the tile, because it can prevent the enamel on the tile surface from slipping when the hole is punched, causing the tile to rupture or scratch the tile surface.
The above is a detailed answer to the tile drill bit. I don't know if you are satisfied with the introduction of the decoration home network. If you want to know more about the tile drill bit, please continue to pay attention to our decoration encyclopedia. Forum!
More related wonderful reading:
Tile drill bit use method tile drill bit precautions
Precision CNC machined stainless steel parts are becoming a choice for many industries due to its desirable physical properties! Stainless Steel is one of the most popular industrial alloys for many CNC machining projects, due to its excellent physical properties. The below benefits have made Stainless Steel parts and products a viable choice for many industries and applications, though they are particularly favored in the medical, automotive, aerospace, healthcare and consumer electronics spheres. While the best and fastest way to make Stainless Steel parts is CNC machining especially CNC milling with stainless steel reach far and wide.
Stainless Steel Cnc Part,Stainless Steel Machine Parts,Stainless Steel Precise Part,Stainless Steel Cnc Part For Sale
Taizhou TS HARDWARE Co., Ltd , https://www.shuwengroup.com