Do not place the machine in a humid place. Choose a well-ventilated place and not expose it to sunlight.
Regular maintenance, cleaning the screw, rotating parts and tracks should always be dripping oil, to ensure that the machine to complete the rotation, moving tasks, reduce wear.
Do not use the side of the engraving machine because you are accustomed to work. This will cause the lead screw and the guide rail to not contact the beam for a long time and cannot be properly lubricated.
Before working every day, check whether the control cabinet and the machine line are loose and whether there is a mixed line problem. Whether long-term use will cause wear of the wire, resulting in leakage.
Because the engraving machine belongs to a machine that has a relatively large dust to work with, at least the gaps in the gaps in the machine are cleaned every week.
Do not place debris, corrosive materials, or magnetic substances that can interfere with the machine's work on the surface of the machine.
Engraving machine power consumption is generally relatively large, so it is necessary to configure a regulator to ensure grounding ground.
The computer that connects the machine should be used separately from the computer that is working on the network. The software on the CD should also use regular software to avoid attacks on the computer and the machine and affect the work.
Steel Cap
Pipe Fitting Cap,Stainless Steel Cap,Carbon Steel Cap
Cangzhou Youlong Pipe Fitting Manufacturing Co., LTD , https://www.ypco88.com