How to install the shower room weather protection shower room water bar installation precautions
Many modern home decoration friends will choose to install shower room, both stylish and convenient, but some netizens reflected: shower room with water seepage phenomenon did not take long, which in the end is how is it? This is due in large part to the improper installation of the shower fascia , resulting in water seepage. So how do you install the shower enclosure ? What else do you need to pay attention to when installing? Let's take a look with Xiaobian.
How to install the shower water barrier
There are several construction methods for the shower room weather strip:
1. When paving the floor tiles, leave a groove, and after the cement mortar has been laid flat, put in the marble weather strip.
2. Use a brick to make out the shape of the baffle, then pave the floor tiles or marble pieces.
Installation steps: In the paving tile, the weather strip is embedded in the floor tile. Some sellers boasted how good the skirts were, and it was actually misleading consumers. The skirt is only a few millimeters higher on the outer edge of the water barrier. This water barrier is actually used for the stone base under the shower room with glass. The glass is placed in the middle of the water barrier. The skirt is to prevent Water seeps into the water barrier from under the glass. Supporting shower curtains, when installed, measure the installation height, so that the shower curtain droops naturally and dangles into the water barrier about three centimeters. This is the best installation effect, and after installation, the water will not Splash outside. The biggest disadvantage of skirts is that if there is no glass pressing above the water barrier, the upper and lower parts of the water barrier are not generally uniformly stressed. For a long time, the lower glass adhesive will loosen.
Add: Some people like to stand up and install the water, no need, 1.8 cm high enough, if the water to 1.8 cm, the floor drain has not been discharged to the water, it is not a problem of the water, but the problem of floor drain.
Shower room weather strip installation precautions
1, the whole shower room
First consider the size, faucet, nozzle, shower, circuit, telephone lines and Other reservations, to do when the water and electricity to be a good shower room, need to carefully ask the factory before installation precautions.
2, simple shower room
First consider the size, faucets, nozzles, showers, circuits and other reservations, water retaining strips can be buried in the tile before filling, so long time the water will not seep out, but the disadvantage is that repair and replacement is difficult. Can also not be buried, sealed with plastic, the same retaining water, but for a long time, after aging will not be sealed, seepage.
The above information about how to install shower bars and how to install the shower bars are briefly introduced here. I hope to help you. For more information, please visit this website. Stay tuned.
shower room
Vacuum pump & Refrigerant recovery unit & Scale
Vacuum Pump & Refrigerant Recovery Unit & Scale,Ac Refrigerant Recovery Pump,Refrigerant Recovery With Vacuum Pump,Recovery Machine Vacuum Pump Combo
Ningbo Kyson Cool Electronic Technology Co., Ltd. , https://www.kysonrefrigeration.com