How old furniture can be refurbished
Due to the accumulation of time, many of the furniture in the home appeared dirty, scratched, and even cracked and deformed. Although these old furniture looked uncomfortable. However, they cannot afford to lose. One is that they will spend a lot of money on repurchasing, and the other is that for some years there are some memories that do not want to easily change the familiar environment. Then the idea of ​​refurbishing the old furniture appears in the mind and how old furniture can be refurbished. ? Xiaobian here tells you a skill to use wallpaper to renovate old furniture .
Prepare materials
Furniture and wallpaper
* Mod Podge glue (manual love material, can not buy wallpaper glue on the white, but also cheap)
* Sponge brush, small painting brush, utility knife or scissors, ruler, rag
* Grinding machine (150 yuan to 300 yuan a, you can also use it to remove old furniture old paint. Buy one, it is worthwhile) or sandpaper, waterborne polyurethane waterproof coating.
step
1. First of all, you must ensure that the surface to be machined is smooth and very, very clean. The destruction of dust is very powerful.
2. Use your own method to crop the wallpaper that fits the size of the work surface, but it does not have to be precise.
3. Use a sponge brush to coat Mod Podge glue or wallpaper white glue on the surface to be machined (when the surface to be machined is large, it is recommended to use wallpaper white glue).
4. When pasting wallpaper, paste from one edge and then step through it all. It's best to use a wet towel or ruler to help you smooth out, so that there will be little or no small bubbles. Also, two hands must be very clean! If there is a bubble, use a needle to poke a small hole in the surface of the air bubble to squeeze out the air.
5. After confirming that the paper is completely glued and the air bubbles are removed, use a ruler and utility knife to remove the excess paper. Tip: The blade must be very sharp throughout the process. The blunt blade may tear the wallpaper. Then use the sanding machine (no sandpaper is also available) to handle the edge slightly, and the work is more like a professional product!
6. If you are using Mod Podge glue, in order to make full use of the advantages of Mod Podge glue, you can apply a layer of paste to the surface of the wallpaper. After about 30 minutes of drying, brush a second coat.
7. Finally, in order to better protect the surface of the wallpaper, you can add a layer of water-based polyurethane waterproof coating.
Mei Sida furniture Xiao Bian reminded: furniture, all the wallpaper attached to the difficulty coefficient is too high, hands-on, then we only need to process the desktop or drawer surface just fine, so that there is no difficulty. Use latex paint in other areas!
This is just a little trick on how old furniture can be refurbished . Wallpaper is ultimately a wallpaper. Although there is a protective coating on the surface, it is best not to have too much confidence in its waterproofness, heat and cold resistance, and anti-wear properties. For better results, it is better to find professional repair furniture to refurbish.
related articles
Wooden furniture renovation how to do wood furniture renovation steps and methods
How to lacquer wood furniture refurbished wood furniture renovation What are the matters needing attention
Our LED Emergency Twin Spot Lights are a cost effective replacement for old fashioned halogen emergency twin spot fittings. Due to the low power consumption of the LED lamps, only one battery is required, reducing option during charging. The super bright adjustable heads make this twin spot ideal for commercial and industrial applications. with a self test feature every 90 days to ensure correct operation. The Led Emergency Lights design makes it quick and simple to install.
Twin Spot Emergency Light,Emergency Twin Spot,Led Twin Spot Emergency Lights,Led Emergency Twin Spot Light
Foshan Nai An Lighting Electric Co.,ltd , https://www.ledpowerpack.com