GB/T14800 geosynthetics static burst test method
The static burst test (CBR method) of GB/T 14800 geosynthetics stipulates the method for determining the bursting strength of the composite materials by the flat end pressing bar. Suitable for all types of geosynthetics, but not for materials with a hole diameter greater than 10 mm.
The static burst test (CBR method) of GB/T 14800 geosynthetics stipulates the method for determining the bursting strength of the composite materials by the flat end pressing bar. Suitable for all types of geosynthetics, but not for materials with a hole diameter greater than 10 mm.
Geosynthetics static burst test (CBR method) test principle:
The sample is held between two clamping rings that press the sample vertically at a constant rate. The top pressure-displacement curve, bursting strength and bursting displacement were recorded.
Geosynthetics static burst test equipment:
The test equipment shall meet the requirements of Class 1 or Class 0 in GBT16825.1 and shall meet the following conditions:
Constant displacement rate of 1.45-55mm/min
2. Record top pressure and displacement
3. Automatic display of top pressure and displacement values.
Geosynthetics static burst test clamping system:
The clamping system should ensure that the specimen does not slip or break. The inner diameter of the clamping ring should be (150 ± 0.5) mm. As an example. When designing the clamping ring clamping surface, the distance between the inner edge of the clamping ring and the clamping zone (ie the starting point of the sawtooth groove) should not exceed 7 mm.
Geosynthetics static burst test data record Each test records the following:
One of the three effective bursting strength values, the unit is kN kN;
- If necessary, the displacement of the rupture measured from the pre-stress of 20 N to the time the specimen is broken, in millimeters (mm), to the nearest I mm
- If necessary, draw a top pressure versus displacement curve;
- evidence of slippage or breakage of the specimen occurring at or near the clamping ring.
Article from: Jinan Zhongchuang Industrial Test System Co., Ltd. Technology Department
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Fully automatic, high-productivity and compact powder actuated tool for grating fasteners
Applications:
- Fastening Grating on concrete, metal frames
- Fastening in Corrosive Environments
Technical Parameters:
- Equipped with Black / Red power levels of (S1JL) Powder Loads
- Equipped with grating nails less than 43mm
Features:
- Automatic feeding
- Various of applications
- Power Adjustable
Grating Fastening Tool
Grating Fastening Tool,Grating Fastening Tool,Steel Frame Grating Fastening,Grating Fitting Tool
Sichuan Nanshan Powder Actuated Fastening System Co., Ltd. , https://www.nanshanpat.com