Effect of fiber structure on mechanical properties of forgings
The segregation of the ingot after forging is improved, and the bubbles and loose structures inside the ingot are compacted and welded, the metal is denser, and the mechanical properties are improved.
As the shape of the ingot changes, the metal flows in the inside of the ingot. Oxides, sulfides and other impurities existing between the grains form a regular directional fiber structure inside the metal, which gives the direction of the mechanical properties of the metal. Sexuality, showing that the mechanical properties along the fiber direction are better than the vertical fiber direction.
Problem raised
Because of this difference, the direction of the metal fiber should be considered in the preparation of the forging process, which makes the forging process more cumbersome, increasing the labor intensity of forging and workers. For large forgings that need to be forged with steel ingots, the directionality of the mechanical properties of the metal is more obvious. However, there is little difference in the directionality of the mechanical properties of small forgings formed from profiles. There is no data in this regard. If we do not consider the directionality of the mechanical properties of the metal, whether it will affect the service life of the parts, we do not have experience in this area.
Therefore, through the comparison of the longitudinal and transverse mechanical properties of the forging fiber structure, after obtaining the data, the difference between the longitudinal and transverse mechanical properties of the forging fiber structure is compared, which provides a basis for considering whether the fiber structure is considered in the forging process.
2. Test process
In mechanical manufacturing, gears are one of the more typical parts. The working condition is more complicated, not only must have a certain surface contact strength, but also have a certain flexural strength and fatigue strength. We use the company's commonly used gear material 17Cr2Ni2Mo for process testing. The sawing machine is blanked and the blank specification is φ 100mm×150mm. The 240mm×200mm×25mm long flat square material is forged along the axial direction of the blank. The 240mm direction is the longitudinal fiber of the forging fiber, and the 200mm direction is the transverse fiber of the forging fiber. On the long flat material, three longitudinal tensile and impact specimens were taken by wire cutting, and three transverse tensile and impact specimens were used. The mechanical properties of the samples were processed according to the national standard size. The test data are shown in Table 1, Table 2 and Table 3.
3. Data analysis
The longitudinal fiber has a slightly smaller yield strength and tensile strength than the transverse fiber, and the longitudinal fiber has a slightly larger impact energy absorption than the transverse fiber, and the longitudinal fiber has a slightly higher plasticity than the transverse fiber. It can be seen that the difference in the longitudinal and transverse fiber structure properties of the forgings is small. This is because in the process of forging the steel ingot, only the total forging ratio is ≥4, the directionality of the fiber structure is more obvious, and the general steel mill does not reach such a large forging ratio when forging the steel ingot.
PHLIZON 640w Foldable LED Plants Grow Light Full Spectrum Phlizon 8 Bars 6 Bars 640W LED Grow Light Phlizon Newest Professional Agricultural Grow Lamp grow lights diy indoor Hydroponic farming led grow light with famous brand led dioes.PH-FD8-E LED is a full-term light fixture that provides consistent, energy-efficient results.
High quality 2835 led diodes,UL listed driver,cost-effective growers choice ETL Listed High efficacy (up to 2.7 μmol s-1 per watt) High output for high intensity Top bin SMD 2835 LEDs Reduced HVAC requirement (30-40% less) Balanced, full-spectrum light output Dimmable 1-10V8-bar configuration allows for using in low rooms, on vertical racks, over benches, and even in tents
It's the best choice for commercial cultivation and even home growers!
Advantages:
1.Unique design, Ultra high PPFD, good for medical plant growth, high yield for plant
2. Best heat dissipation, long lifespan >50000 hours.
3. Any spectrum can be OEM/ODM, at any stage of growth.
4. Top quality material, Easy detaching and maintenance, Spectrum changeable, High effective.
640w,led grow light,lm301b,lm301h,grow lamp
Shenzhen Phlizon Technology Co.,Ltd. , https://www.philizon.com