Discussion: The new pattern of the US stone market

In recent years, there have been some changes in the decoration of stone in the United States. The decorative stone has been gradually developed from polished granite to the use of matte granite, which caters to the current trend of decoration. According to relevant experts, the production process of this rough-faced granite is to first smooth the granite and then burn it with a high-temperature flame. This method does not see any color difference, and it has a natural aesthetic decorative effect, so the cost is higher. High, the process has been widely promoted and applied in new construction projects in the United States.

Nowadays, the granite exterior finishes are mainly made of rough-faced granite. The polished granite is only used for some strips or partial setting. The effect of matching is very good. On the contrary, there are also some engineering exterior finishes to polish the granite. Stone-based, set off with matte granite. In order to facilitate the installation of granite, it can be processed into two parts: polished and matte on the same granite. The process is to completely polish the granite first, and then cover the portion of the rubber layer that needs to be polished to cover the high temperature resistant rubber layer. The part that needs to be formed into a matte surface can be singed with a flame, and the effect is ideal. The granite finishes in the United States are not only well-configured, but also have a small color difference. They are all preferred from the famous stone-producing areas around the world, so the cost is high.

When the United States uses stone as the exterior finish, there are different processes such as polishing, polishing, flame singeing, chiseling, and axe. In the architectural art, using different combinations of techniques has become a new trend in the development of architectural stone decoration. For example, in the decoration project of the Bank of China Building in Hong Kong, the same face is made of the same stone, and the two surface treatment methods of polishing and flame singeing have achieved a good artistic decoration effect.

In the United States in recent years, a large number of prefabricated outer panels with granite finishes have been developed for use in reinforced concrete frame structures and steel structures. The size of the siding is also increasing. The siding is generally located on the floor. The exterior wall panels with granite finishes are prefabricated and shipped to the site for installation. With this process, it can be molded once in the factory, not only with good quality, but also with high efficiency, which greatly improves the level of mechanization and factory. Practice has proved that this method of façade with outer facing, structural layer, waterproof and heat preservation is worthy of popularization and application.

Stone is also used more in interior decoration in the United States. The ground granite facing is multi-slotted with a slit width of 5-10MM and seamed with silicone rubber. Many floors use fine-grained granite, which is not only non-slip, but also has a good foot feel when walking. In addition, in some important public buildings in the United States, white stone similar to Chinese white marble is used as the exterior wall finish. Generally, the stone with fine surface is very beautiful. The size of the stone can be large or small. Silicone rubber joints.

The large halls, halls, and entrances of some large public buildings in the United States are designed with large-diameter cylinders. These cylindrical finishes generally use colorful stones, some of which are as high as 8-9M, and it is difficult to find seams. The use of stone for artistic sculpture is also common in foreign countries, especially in some important large-scale excursions. In short, from the development trend of the international architectural decoration industry in recent years, the glass curtain wall has been decreasing, and the stone finishes are increasing. From the point of view of stone veneers, in reinforced concrete frames or steel structures, there are more prefabricated sidings with exterior walls with stone veneers. In the architectural art technique, the matte stone and the polished stone are used together, which has the decorative charm of stone.

Polyurethane Corners

Polyurethane Panel Molding Corners CP264-11 matchs Panel Molding CP264.

Decorative Panel Moulding PP332 matchs Polyurethane Corners PP332-16.

Various Hand Carved Polyurethane Corner, Luxury Polyurethane Corner,Polyurethane Pu Corner, Polyurethane Ceiling Corner, Cornice Corners, Crown Corners, Inside Corner Molding are avaliable, some Polyurethane Corners are special designed for special mouldings, easy to install, combine mouldings with Polyurethane Corners, you may creat beautiful picture frame.

Muti-functional style Polyurethane Corners are enable plain or Carved Panel Mouldings jointing perfectly, can enhance the effect of decration.

You may choose plain or flower Polyurethane Corners to match the Panel Molding, achieve perfect design.

Advantages of Chair Rails and panel moldings :
1. Elegant European style
2. Many models to choose from
3. Suitable for both DIY and construction projects
4. Superior to Gypsum moldings
5. Light weight, easy to transport and install
6. Elaborate patterns
7. Beautiful Matching
8. Labor efficient

Polyurethane Corners,Hand Carved Polyurethane Corners,Luxury Polyurethane Corners,Polyurethane Ceiling Corners,Chair Rails and Plain Panel Mouldings

Suntronic New Materials Technology Co., Ltd. , https://www.dsmdecor.com