Decoration dry goods plus, those are not standard construction

In the good season of spring, a nest of decoration insects began to move. Even though modern decoration, supervision, and inspection of houses are becoming more and more standardized, there are still a lot of irregular constructions. Even if the insects we are decorating don't reach the level of "walking hands and knowing whether there are any," at least they shouldn't do Xiaobai in white, or simply "white and white". In fact, during the renovation process, there are still hidden dangers caused by cutting corners and irregular construction. Today, Xiao Qi has put together some suggestions for the reference of the bugs. I would like to take this opportunity.
Tamper
The most common jerry-building cuts at the construction site are the budgets for raising the budget. It is plain that the materials did not follow the budget. Generally, water pipes, wires, switch panels, etc. at the construction site will be replaced by brands other than budgets.
Beam at the top of the doorway

If the structure in the space is reformed, then the new masonry hole is a must, and the most likely cause of irregularity for the constructors is the concrete lintel at the top of the door opening. The lintel is the basis for the structural stability, which can guarantee that the new masonry hole will not be deformed in the long-term use in the future. In order to cut corners and replace materials with wood lintels, construction workers are not only vulnerable to moisture deformation, but also have even a layer of cement on the outside of the brick walls. As a false lintel, the owners must be careful.
Kitchen waterproof The waterproof process at the bottom of the kitchen wall is very important. Many workers directly use bricks to make the density at the bottom of the wall loose, resulting in poor waterproofing. PS: The correct construction should be to make a concrete wall 20cm above the ground, and then use bricks. After the wall and floor are leveled, use water-proof paint and waterproof waterproof mortar for the wall to make waterproof twice. After 24 hours, close the water test and then tile the tiles to ensure the waterproof performance of the wall.
Hidden project In the acceptance of hydropower, it is common to see water, electricity, and gas pipelines tightly affixed together and no proper distance is reserved. This can easily lead to hidden dangers. PS: When laying the water and electricity pipes, the parallel spacing should be maintained at 10cm or more, and the crossover distance should be maintained at 5cm or more. The minimum distance between hot and cold water pipes is 3cm, and the distance between gas pipes and water pipes is 15cm or more. In case of a leak in a certain pipeline, it will not affect other pipelines.
Slotted wall backfill Some owners were upset that the house that had not been occupied for a long time was found to have cracked in the wall of the original hydropower pipeline. In fact, when the slotted wall is backfilled, there must be a lot of attention to the details of the construction. We must use water to wet the tank and backfill with cement mortar. The reason is that when the old and new walls are connected, the dry wall will come into contact with the wet cement and absorb the water, so that cracks will occur in a long time.
Covert pipe not marked Kitchen and toilets usually install some brackets, and often accidentally cut the internal pipeline and cause leaking water pipes. Therefore, at the same time as the concealed project is completed, it is necessary to mark the position where the pipeline passes through in time to ensure that the pipeline will be placed on the pipeline during the later period of drilling.
Sewage pipe shift There should be different requirements for home improvement. Some sewage discharge pipes need to be moved. Care must be taken in the part where the moving sewage pipe is connected to the ground, otherwise leakage is likely to occur. PS: Through the hanging mold construction, after the cement is divided into two waterings, the floor is treated with water-repellent treatment and the water-removal test is performed for 24 hours. The pipeline displacement work is considered to be in place.
Circulating hot water line Nowadays, families are more respected with geothermal heat. As a whole-house circulating hot water of a comfortable system, the use of three links in the middle of the return pipe is not correct, and the water at the other end of the return pipe will not be able to flow back, causing inconvenience in life.
Summarizing this, the general construction is not standardized sauce, but there are many small informal construction of this series of proposals, where conditions permit, you can ask a professional third-party supervision on behalf of you to on-site monitoring, after all, people are Professional.

Decoration supervision decoration construction knowledge construction acceptance

Indoor LED Grow Light

How to Select the Best Grow Light for your Greenhouse?

The plant needs light to thrive cause the light is essental for photosynthesis.without it,plants can not make food.but light can also be too intense,too hot or last too long for growing healthy plants.plant growth accelerates with abundant light because more of the plant`s leaves have exposure,which means more photosynthesis.in the winter,days are not long enough,but many plants still need 12 hours or more of light per day.

Now,adding LED Grow Lights to your greenhouse is an nice choice if you live in the north, and can not get enough daylight in winter.you might be take HID into consideration,cause it has high output and cover a wide area.but now,we providing you some dfferent.the newest type of grow lights use LED technology.

Provides Maximum Light Density and optimizing spectrum(410nm-740nm,white)
as we know that the plants need more light from the blue side of the spectrum during their seedling stage and when developing foliage and require light from the orange to red side of the spectrum while inblooming and fruiting phases. We adopting lastest intergrated COB technology, white , more red and blue PAR(410-740nm) per Watt than any other lighting fixture for the best color uniformity.

Dual Veg and Bloom for plant growth and bloom
the Led grow lights feature selectable VEG and BLOOM light spectrums to deliver maximum performance from seeding through the flower stage and finally harvest.

Increase yields and potency
using high quality lense that hyper-focus the lights on your canopy.the photons are beamed directly to the plants.this gives growers the ability to get greatest possible crop yield.

Reduce your costs with energy efficiency
energy-efficient cannabis grow lights cost between 40%-60% less to operate compared to HID lam year.
Led grow light also eliminate the needs for ballasts and reflectors while they minimize the cooling systems,accelerating your payback.you will see the electrical bills trimmed by approximately half,year after year.

Installs and operates simply
the input voltage is AC100V-240V,fit for the world standard,built-in power supply.do not need other equipment,just access to the Plug,the lamp will be work smoothly. The led grow lighting is small size,just few inches and easy to install.it is the good option for some greenhouse.

Long lifespan
using built-in quiet fans and the shutter in the wind,induced draftfrom all sides.runs with quiet. Useadvanced isolation power supply and soft start protection technology, to prevent the high voltage when turn on the light from damagingthe lamp body.

What' the best indoor led grow light ?The definition of Philizon :
Safe and Reliable(Meet the safety requirments around the world)
Effective(Good efficacy for the plants)
Energy Conservation(High efficiency and high PPFD in same power)
Long life(Use long life span elements)
Soft and comfortable lights(No Harmful,Flicker free,protect your eyes)

Features
- Water-cooling design, 20°C+ lower than fan-cooling design
- Vac100-265 universal input voltage
- Advanced secondary optical lens design for penetration
- Smart over-heat protection system
- Product designed to ETL standards
- Completely noise-free with water-cooling system
- Effectual spectrums proven by professionals
- Quick slide-into-track system to combine two or more LED fixtures together

Item Display

Full Spectrum Indoor LED Grow Light and High PAR

Application

Our professional full spectrum Indoor LED grow light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.

Philizon Indoor LED Grow Lights by Light Efficient Design provide growers a better solution for reliable and effective agricultural lighting. Light Efficient Design has been making LED retrofit lamps for over six years, and has a strong product lineup, proven designs, and excellent reliability. And now, our energy-efficient, money-saving products are helping to promote success in indoor farming and commercial greenhouses.

Warmly welcome to take a visit on our Company at any time.

Indoor Led Grow Light,Popular Indoor Led Grow Lights,Popular Indoor Grow Lights,Urban Farming Grow Lights

Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlight.com