Common valve torque calculation method
The valve is a control component in the fluid delivery system and has functions such as cut-off, regulation, diversion, prevention of backflow, regulation, shunting or overflow relief. According to Xingke Hardware Network, the valve is a control component in the fluid delivery system, with functions such as cut-off, regulation, diversion, anti-backflow, voltage regulation, shunt or overflow relief.
It is understood that the valve is a control component in the fluid delivery system, with functions of cut-off, regulation, diversion, prevention of backflow, voltage regulation, shunting or overflow relief.
The torque calculation of the valve is specifically: the square of the valve diameter of the one-half of the valve is 3.14, which is the area of ​​the valve plate, and multiplied by the pressure (ie the working pressure of the valve) to obtain the static pressure of the shaft, multiplied by the friction coefficient. (To check the table, the friction coefficient of general steel is 0.1, the friction coefficient of steel to rubber is 0.15), multiplied by the shaft diameter divided by 1000 to obtain the torque of the valve, the unit is cow·meter, electric device and pneumatic actuator reference safety The value is 1.5 times the torque of the valve.
Concerned about surprises
Label: Calculation method for common valve torque
Previous: The difference between floating ball valve and fixed ball valve Next: Introduction to boiler safety valve failure analysis
Kitchen Shower,Kitchen Faucet,Brass Kitchen Faucet,Pull Down Kitchen Faucet
Yuyao Zelin Sanitary Ware Co., Ltd , https://www.zelinshower.com