Recently, the new type of railway vehicle speed-boogie truck maintenance platform designed by Zheng Lin, the employee of the transportation department of Chinalco Henan Branch, was successfully developed and put into use, effectively solving the time-consuming and labor-intensive and time-consuming operation of the vehicle speed-up bogie. The problem was that the cost savings were RMB 160,000, which laid the foundation for the safe operation of the company’s self-provided rail vehicles on the National Railways after the National Railways speeded up.
The bogie maintenance platform is one of the equipments that must be used to overhaul the new type of vehicle bogies. It is mainly used to fix new bogies during maintenance. However, the existing maintenance platform is limited by the height and size of the platform and the work space, and only the preparation time before the work takes half an hour, which severely restricts the progress of the vehicle maintenance. In order to better fasten and fasten the speed-boosting bogies, Zheng Lin used scientific calculations and careful measurements to install springs and pin clamps in the air cylinders with a diameter of 150 mm according to the requirements for speeding trucks. To adjust and change the bogie height and card fastness, and welded into a flat assembly frame. In this way, after the bogie is placed on the assembly frame, only one employee can grip the bogie firmly by gently moving the fixture. After drawing the plan of the maintenance platform and repeated simulation tests, a new type of speeding truck maintenance platform for railway vehicles finally came out.
It is understood that this product is the first in the industry, especially suitable for small-scale vehicle maintenance operations, in particular to adapt to the training site has not yet fully promote the pipeline operations and learning for the construction of bogie teaching. And this kind of equipment is safer and more reliable when placed on the ground, the fixture is simple, one person can operate, convenient and quick, the working space has been expanded, and the preparation time of the disassembling and repairing platform can be shortened by 20 minutes. The same kind of products that can be seen and available at the moment are hydraulically mounted bogies. The inlet line of the hydraulic pump is easily broken due to space constraints, and the fixture is mounted on a small platform with wheels. It is unstable. Due to the limitation of work space, operators are not safe.
At present, this section of staff has produced 4 bogies maintenance desks. It is understood that the purchase of a similar maintenance station requires a cost of 42,000 yuan, and the cost of this maintenance station is only 2,000 yuan, and this alone can save 160,000 yuan.
PCD Cutting Tips (Cut Pieces)
PCD cutter pieces (grains) are cut from Pcd Cutting Tool Blanks and are a more efficient and economical cutting service for customers than the wire cutting method, laser cutting.
And PCD Cutting Tips are welded to saw blades, knives and other tools used for processing wood and metal.
Pcd Cutting Tips,Polycrystalline Diamond Cutting Tools,Pcd Shank Cutter,Pcd Cutting Tool For Stone
Henan Bohong New Material Co., Ltd , https://www.bohongpcd.com