Buy wardrobes should pay attention to hardware materials

Buy wardrobes should pay attention to hardware materials
Wardrobe drawer
Laminate-smooth laminates are ideal for storing knitwear and shirts. The distance between the slabs should not be too large, otherwise the stacked clothes are too high, and it is easy to mess with the other when you take one of the clothes. Baskets are used to put T-shirts, which look clear and easy to find. Transparent drawers in front can also achieve this effect. Laminates and drawers are available in a completely pull-out style so that the deepest storage can be easily accessed. Individual laminates in the wardrobe can be designed to be active. When the number of garments increases or decreases, the position can be adjusted at any time.
Hanging wardrobe
The installation height of the clothes rail should be the height of the hostess plus 20 cm. When installing the clothes rail, it should be noted that the clothes rail must be taken within the actual depth of the wardrobe as a standard, and the distance from the top board must be 4-6 cm away, this size must be met, because the distance is too short Afterwards, it will be more difficult to put clothes on the shelves; the distance is too long and space is wasted. Note that the length of each cross should not exceed 120 cm, otherwise there will be problems with the load bearing of the pole.
Wardrobe storage box

The use of storage boxes to store items is easier to categorize, and the names of the items can be marked outside each box. The lidded box prevents dust from contaminating the clothes, and is easy to use even without cabinet doors. The box allows for better placement of irregularly shaped objects, such as some sports equipment. Hats and other incompressible items are also a good way to store them in boxes.

Electric Hammer Drill

Hammer Drill, also known as a percussion drill or Impact Drill, is a power Tool used chiefly for drilling in hard materials. It is a type of rotary drill with an impact mechanism that generates a hammering motion. The percussive mechanism provides a rapid succession of short hammer thrusts to pulverize the material to be bored, so as to provide quicker drilling with less effort. If a hammer drill's impact mechanism can be turned off, the tool can be used like a conventional drill to also perform tasks such as screwdriving.

Img 3816 JpgImg 3854 JpgImg 3853 Jpg

Chisel Concrete Drill Bit,Hammer Drill Bit,Masonry Brick Drill Bit,Drill Hole Tool Set

Behappy Crafts (suzhou)Co.,Ltd , https://www.haoyuebehappy.com