Application of CopyCAD in Reverse Engineering (2)
1. Process point cloud data:
CopyCAD has a friendly input and output interface that supports point cloud data reading in multiple formats. In addition to the standard formats such as ASCII, IGES and NC, special data formats are available for different scanning devices.
For input point cloud data, CopyCAD provides a variety of point cloud editing optimization methods for different measuring devices and measurement methods, which can reorder point cloud data and move, rotate, zoom, mirror and other editing operations, according to different requirements. The point cloud model is clipped in a variety of ways, including planes, polygons, or contour curves. The function of the offset point cloud model is used to correct the deviation caused by the probe, and the point cloud model is filtered by using functions such as weighted average smoothing, burr smoothing and tolerance, sparseness, filtering, etc., smoothing, and removing dead pixels. Improve the quality of the point cloud to ensure the quality of the triangle patch and improve the processing speed.
For complex point cloud models that require several measurements, CopyCAD also provides manual alignment, reference point (ball) alignment, and optimal fit and alignment for alignment and output alignment accuracy data for reference.
2. Process the triangular model:
Since the triangular model is the basis for generating surfaces, the quality of the triangular model plays a key role in reverse success.
For the creation of a triangular model, CopyCAD provides both automatic and manual generation of triangular models.
Due to the model's own defects or incorrect measurement methods, or the existence of measurement data, there are often many defects and holes in the triangle model generation. There are several ways to edit and optimize this CopyCAD: you can manually add or remove partial triangle patch data. CopyCAD provides Trifix function for automatic and manual stitching of holes in the triangle model; it can automatically detect and repair the existing triangular models with small, narrow, overlapping and intersecting problems, and smooth the triangular patch solid model. Operation: CopyCAD's interactive editing function can not only smooth the triangle model, but also eliminate the problems in the triangle model generation process due to data problems or measurement methods, as well as stacking and engraving functions, which can smooth and repair defects on the parts, avoiding the resulting Measuring model problems, especially for repairing damaged parts, improving the surface quality of the STL model.
Previous page next page
The 20V Cordless Circular Saw is Perfect for Cutting Wood, especially on Bevel Cutting and Straight Cutting, compared to the Jig Saw.
The 20V Cordless Wood Working Circular Saw is convenient to use at anywhere, wireless power supply, 4Ah and 2Ah Battery is rechargeable.
4Ah battery can cut around 30m wood.
This Cordless Power Tool is designed friendly, can be used by Left or Right Hand.
It is a cordless wood cutting power tools that users feels much better, compared to jig saw.
The Cordless Wood Working Power Saw with single speed 4000rpm, Laser Function, Bevel Cutting 45°, 55mm cutting depth at 90 Degree, 36 cutting depth at 45 Degree.
The Cordless Circular Saw With a dust blower for max cut -line visibility.
The Cordless Wood Cutting Power Tools with protection button for your safety, soft rubber handle for comfortable use.
Cordless Circular Saw,Portable Circular Saw,Cordless Circular Saw With Battery,Hand Circular Saw
Ningbo Brace Power Tools Co., Ltd , https://www.cnbrace.com